Printing From The Manual Feed Slot - Canon LBP3360 User Manual

Printing from the Manual Feed Slot

The manual feed slot can be loaded with only one sheet of paper at sizes of A4, B5,
A5, Legal, Letter, Executive, Index Card, Statement, 16K, and paper of the following
custom paper sizes.
Custom Size Paper
•
When loading paper in portrait orientation: Width 76.2 to 215.9 mm; Length 127.0
to 355.6 mm
When loading paper in landscape orientation (Only when UFR II Printer Driver is
used): Width 127.0 to 215.9 mm; Length 127.0 to 215.9 mm
When printing only a sheet of paper that is different in size or type from the one
loaded in the paper cassette, load the paper in the manual feed slot. Paper that
cannot be loaded in the paper cassette such as transparency and envelope can be
loaded in the manual feed slot.
When printing from the manual feed slot, you need to specify the following settings.
IMPORTANT
Match the setting for SLOT PAPER SIZE in the SETUP menu of the printer and that in
the printer driver. If they do not match, the message <PC LOAD "size"> appears. In this
case, the setting value for SLOT PAPER SIZE is changed to that in the printer driver by
pressing the
NOTE
If you are printing from an operating system on which the printer driver cannot be used,
previously specify the paper source to MANU.FEED SLOT. (See p. 4-12)
■ Loading Paper in the Manual Feed Slot (See p. 4-38)
■ Specifying the Size of the Paper in the Manual Feed Slot (See p. 4-46)
The FEEDER MENU options in the SETUP menu
SLOT PAPER SIZE = the size of the loaded paper
•
When printing from DOS, UNIX, or other operating system on which the printer driver
cannot be used, specify the following settings in addition to SLOT PAPER SIZE.
The FEEDER MENU options in the SETUP menu
STD PAPER SIZE = the size of the loaded paper (See p. 6-15)
•
STD PAPER TYPE = the type of the loaded paper (See p. 6-17)
•
(Online) key, allowing you to continue printing.

Printing from the Manual Feed Slot

4
4-37