Connect To The Device - Skoda Infotainment Radio Bolero Owner's Manual

Connect to the device


Introduction
This chapter contains information on the following subjects:
Pairing procedure from the device
Pairing procedure from the mobile phone
Fast connection to another paired mobile phone
Automatic connection
Disconnection
First and foremost, pay attention to the safety instructions
To connect a mobile phone with the device, the two devices must be paired.
The pairing can be initiated from the device or from the mobile phone.
Prerequisites for successful pairing:
The ignition is switched on.

®
The Bluetooth function for the mobile phone is switched on

®
The Bluetooth function for the mobile phone is switched on.

The visibility of the mobile phone is switched on

The visibility of the mobile phone is switched on.

During the pairing process, no other mobile phone may be connected with

the device.
The devices are paired with each other

When pairing from the mobile phone, follow the instructions in the owner's

manual of the mobile phone.
The device is indicated as SKODA_BT_wxyz in the Bluetooth
nected. wxyz is replaced with the last four symbols of the VIN code of your vehi-
cle. You can change the name of the device
Possible symbols in the list of found or paired devices
Symbol
Devices that support the functionality of the hands-free sys-

tem (Bluetooth
Devices that are connected to the device via Bluetooth

file HFP
a)
» page 4.
» page
» page 22.
» page 39.
®
device to be con-
» page 22.
Importance
®
profile HFP)
a)
Symbol
Bluetooth

Bluetooth

files A2DP and AVRCP
a) ®
HFP is a Bluetooth profile that supports the functionality of the hands-free system.
b) A2DP and AVRCP are Bluetooth
39
40
Note
40
40 The maximum number of paired devices is 20. If a new device is paired after the
maximum number has been reached, the paired device that was least recently
41
used will be automatically deleted.
Pairing procedure from the device

First read and observe the introductory information given on page 39.
›
Press the button
PHONE
22.
Where the mobile phone has been paired but the automatic connection is unsuc-
cessful, check that the mobile phone's Bluetooth
that the device is visible.
Press the function key
device is included in the list of paired devices.
If no mobile phone is connected to the device, the message Please find and con-
nect a mobile telephone is displayed.
If a mobile phone is connected to the device, press the button
page 37.
›
Press Find telephone.
At the end of the search, the display shows the message Device search finished.
›
At the end of the search, or even during the search, press the button Results.
The system displays a list of found Bluetooth
button Results, the system displays the list after 25 seconds).
›
® Select the mobile phone that you want to pair.
pro-
›
Confirm the pairing request on the mobile phone.
Next, depending on the type of the mobile phone:
Importance
® ®
players (Bluetooth profiles A2DP and AVRCP)
®
player connected to the unit via Bluetooth
b)
®
profiles that support multimedia functions.
.
®
function is switched on and
» Fig. 22 on page 37 to check whether the Bluetooth
B
®
devices. (If you do not press the
b)
®
pro-

®
» Fig. 22 on
B

39
Communication