Skoda Infotainment Radio Bolero Owner's Manual page 44

A screen appears to enter the phone number
You can select the following functions:
Delete the digit

Dial the entered number
1)

- Add a prefix if this option has been set in the phone settings
2)

Entering a number using the voice control

The input screen also functions as an alphanumeric keypad that you can use to
search for contacts in the phonebook.
For example, if you enter 32, the unit will display contacts with the letter se-
quence DA, FA, EB, etc.
Select the desired contact by pressing the corresponding function key.
Phone book

First read and observe the introductory information given on page 41.
›
Press the button
→ .
PHONE
The internal phonebook provides 2 000 free memory locations. Each contact can
contain up to 5 telephone numbers.
Downloading and updating the phone book
Upon first connection of the mobile phone with the device, the system begins to
download the phone book from the phone and from the SIM card
ory of the control unit.
If the phonebook downloaded from the mobile phone contains more than
2 000 contacts, loading is stopped and the message Contacts not completely im-
ported appears on the screen. Only the already downloaded contacts will be
available.
1)
If no number is entered, the last dialled number will be displayed after you press the symbol key .
2)
If the addition of a prefix option is switched on, but the prefix is not entered in the phone settings,
the last dialled number will be displayed in the input field after you press the symbol key . If the
prefix has been defined and a number has been entered in the input line, the prefix will be added
before the telephone number and the system will attempt to establish a connection when you press
the symbol key .
3) Some mobile phones do not support downloading of contacts from the SIM card.
4)
This function is only supported by some mobile phones.
42
Communication
» Fig. 24.
» page 37
» page 13
into the mem-
3)
The first 200 contacts along with the contact data, including the picture associ-
ated with the contact, are downloaded onto the device memory
Each time the mobile phone has established a new connection with the device,
the relevant phone book will be updated.
During the update, the phone book which was stored after the last completed up-
date will be available. Newly stored telephone numbers are only shown after the
updating has ended.
If an error occurs while loading the phone book, the message Import failed.
Please try again and check whether the BT device (X) allows connections.
You can start the update manually with a function in the phone menu
Find contact

Press the button Find to open the input screen with keypad to search in the pho-
nebook » page 9.
Select contact
Press the function key for the desired contact to dial the telephone number.
Where a contact contains several telephone numbers, the system displays a
menu containing the telephone numbers for the contact.
Contact details
Press  to display the contact details.
.
4)
.» page 37
