Skoda Infotainment Radio Bolero Owner's Manual page 42

›
Enter the PIN code shown on the unit display into the mobile phone within 30
seconds
or
›
Confirm the PIN code shown on the display of the mobile phone in the unit and
the mobile phone, within 30 seconds.
If the mobile phone supports the Bluetooth
phone might prompt you to pair the phone as a Bluetooth
If the search failed, check whether the prerequisites for a successful coupling
have been fulfilled » page 4.
During the search, the system displays a list of function keys:
■  - Cancel the search
Help - Display help
■
Results - Display the search results as they become available. Here, you can se-
■
®
lect a found Bluetooth device before the search has completed.
Pairing procedure from the mobile phone

First read and observe the introductory information given on page 39.
When pairing from the mobile phone, follow the instructions in the owner's man-
ual of the mobile phone.
›
Have the mobile phone search for available Bluetooth
›
Select the device in the list of Bluetooth
Depending on the type of the mobile phone:
›
Enter a minimum 4 digit PIN code and confirm it;
›
Within 30 seconds, enter the same PIN code on the screen of the unit
or
›
Confirm the PIN code shown on the unit screen in the mobile phone and the
unit within 30 seconds.
You can cancel the pairing at any time by pressing Cancel.
1)
Provided that the ignition and the Bluetooth
2) With some phones, it is necessary to set the connection to the device as "authorised" in order for the
automatic connection to be successful. If this is not set, the system will prompt you for a confirma-
tion each time you attempt to connect to the mobile phone.
40
Communication
®
profile A2DP or AVRCP, your mobile
®
player.
®
devices.
®
devices.
®
function are switched on.
Fast connection to another paired mobile phone

First read and observe the introductory information given on page 39.
If you want to connect the device to another paired mobile phone, the existing
connection does not have to be terminated. The connection to the existing mo-
bile phone is automatically terminated by connecting to another mobile phone.
›
In the PHONE main menu, press the function key
A list of up to four previously connected mobile phones will appear.
›
Select the paired mobile phone to be connected with the device.
›
Confirm the connection by pressing Replace.
If the desired mobile phone did not appear in the list of the four previously con-
nected mobile phones and is not in the resulting list of paired devices, then the

mobile phone must be paired with the device
Automatic connection

First read and observe the introductory information given on page 39.
After the device is switched on, the system attempts to connect
cently connected mobile phone
system will attempt to connect to other previously connected phones, one by
one.
The message connection being established automatically... appears on the
screen during the automatic connection process.
If the phone was not found, the message Please search for and connect to a mo-
bile telephone appears on the screen.

» Fig. 22 on page 37.
B
» page 39.
to the most re-
1)
. If the connection cannot be established, the
2)

