Skoda Infotainment Radio Bolero Owner's Manual page 17

Operation

First read and observe the introductory information and safety warn-
ings on page 13.
The voice control system can usually be operated through the method "say what
you see."
Utter the descriptions on the function keys highlighted in green. For example, the
function key select no. can be accessed via the voice command "select number".
Voice control settings » page 22.
Icons in the voice control menu
- The system plays an audio response

- The system is waiting for a voice command

- The voice command input is stopped

- The system detects a voice command

As long as the system is playing a voice output, it is not necessary to await the
end of the message playback. The message can be stopped by briefly pressing
the button or the icon button  on the multifunction steering wheel. In
VOICE
this way the voice output is aborted and a new voice command is expected.
not recognizing a voice command

First read and observe the introductory information and safety warn-
ings on page 13.
If a voice command is not recognised, the system answers with Sorry? and you
can give a new command.
If the system does not recognise the second voice command, the help message is
provided again and you can give a new command.
If the system does not recognise the third voice command, the system plays the
Voice control cancelled message and the dialogue is ended.
» page 15
possibility of a new voice command input

First read and observe the introductory information and safety warn-
ings on page 13.
A voice command can only be changed or re-entered when the symbol  is still
displayed.
You do not have to wait until the voice command is recognized by the system.
By pressing the or the Symbol key  on the steering wheel, the function of
VOICE
the voice command recognition is restored.
stop/restore voice command input

First read and observe the introductory information and safety warn-
ings on page 13.
In some menus, the procedure for entering voice commands can be stopped by
turning the knob » Fig. 1 on page 5.
2
The symbol displayed on the device screen or in the information display changes

from  to .
Restore entry
›
by pressing the function key with the symbol ;
›
by pressing the button
VOICE
›
by pressing the button  on the multifunction steering wheel.
meaning of the symbols in the voice command description

First read and observe the introductory information and safety warn-
ings on page 13.
Sym-
bol

| Utter alternative voice commands, such as phone | (or) radio | (or) media.
The system awaits the next voice command, for example, utterphone
> contacts and say the name of the desired contact, for example, Jan No-
vák.
on the unit;
Importance
Device operation



15