If you want to Then
Conference a call The Conference feature allows you to
Mute/unmute a call While in an active call, press the
Change profile 1. Press the
conference up to the maximum number of
parties set by your system administrator.
To add another party to a call
1. Dial the first party, then press
current call is placed on hold and you
hear a dial tone.
2. Dial the number of the next party and wait
for an answer.
3. Press
again to add the new party to
Conf
the call.
4. Repeat steps 1- 3 for each party you want
to conference in to the call.
Adding a held call to the current call
1. Press
. The current line and the held
Conf
line icons flutter.
2. Press the line button of the held call.
3. Press
again. All parties are now
Conf
connected.
softkey and then press the
That the call has been muted is indicated on
the display.
Press the
softkey again to unmute the
Mute
call.
Prof
2. Use the
keys to select a new profile.
Nav
The selected profile is marked with an
asterisk (*).
Conf
More
softkey.
Mute
softkey in standby mode.
. The
27