Avaya 3641 User Manual page 26

If you want to Then
Make an emergency
Transfer a call 1. With the call active (or with only one held
26
From standby mode, press the emergency key
(key #1) for 3 seconds to activate the call.
call
To determine if an emergency key has been
programmed: Open the speed dial list by
pressing the
mode. The emergency key will appear as the
first item on the speed dial list with a
front of it. It will also appear as entry
number 1.
(Avaya 3645 only) The side button may be
programmed to place a call to an emergency
number. Press the button once to test this. If
a message appears prompting you to press
the button twice in two seconds, it is
programmed to place an emergency call. See
the Emergency Dial/PTT section for more
information.
call and no active calls), press the
softkey. This places the call on hold. You
will hear a dial tone for the next available
line.
2. Dial the number to which you want to
transfer.
3. Announce the call to the recipient. Press
again. The call is sent to the exten-
Tran
sion or number you dialed. A two-second
display message indicates the transfer is
complete.
4. Press
END
If the line is busy or if no one answers, return
to the held call by pressing its line button.
softkey from the standby
Spdl
to hang up your handset.

in
Tran