Rack Mounting - Panasonic WJ-MS488 Operating Instructions Manual

RACK MOUNTING

To install the WJ-MS488 Quad Unit in an EIA 19-inch
rack, use the rack mounting brackets (provided) and
eight screws (provided, M3x10).
1. Turn off the power of the unit.
2. Remove the four screws fixing the rubber legs, and
remove the four rubber legs from the unit.
3. Attach the rack mounting brackets on both sides
and fix them with eight screws (provided).
Eight screws (Provided)
Fix the rack mounting brackets
Remove four rubber legs.
4. Install the unit in the rack with four screws (to be
procured locally).
EIA 19"
rack
Cautions:
1. Leave one space free both above and below the
unit, or install a cooling fan in the rack.
Do not block the ventilation opening or slots in the
cover to prevent the appliance from overheating.
Always keep the temperature in the rack within 50°C
(122°F).
2. If the rack is subject to vibrations, secure the rear of
the unit to the rack using additional rack mounting
brackets (to be procured locally).
-6-