Table of Contents
Advertisement
Monitoring the Playback Picture
A. Playback Picture
1. Confirm that PLAY mode is the current mode. If the
current mode is any other, reset the mode and
select PLAY mode.
The word "PLAY" appears on the monitor screen.
2. Operate the VCR.
Notes:
• Zooming picture is available for the playback
picture. See "B. Zoomed Playback Picture"
below.
• The word "PLAY" appears only when ON is
selected for PLAY TITLE on the SYSTEM SETUP
menu.
When the SEQ mode is selected, the order of the pic-
tures to be recorded changes as follows if you assigned
QUAD-A, QUAD-B, or 3x3 in the sequential order of
FULL SEQ (setting of the VCR OUT menu is required):
When the Single or Multi picture is selected
When two or three parameters of the VCR OUT menu
are ON, the pictures are recorded as follows.
When the VCR OUT menu is set as below:
** VCR OUT **
QUAD A
QUAD B
3x3
Full size spot picture is selected
after power is turned on.
Pictures to be monitored
on the screen
Full Size Spot
QUAD-A is selected.
QUAD-A
Full size spot picture
is selected.
Full Size Spot
3 x 3 is selected.
3 x 3
ON
OFF
ON
Pictures to be recorded
on the VCR
QUAD-A
QUAD-A
QUAD-A
3 x 3
When the SEQ mode is selected
An unassigned multi picture in a FULL SEQ order will
not be recorded even if all parameters of the VCR OUT
menu are ON.
WHEN the VCR OUT menu and the SEQ SETUP menu
are SET as below:
QUAD A
QUAD B
3x3
FULL SEQ
1: 1CH
2: 2CH
3: 3CH
4: 4CH
5: 4A
6: 3x3
7: OFF
8: OFF
9: OFF
10: OFF
Pictures to be monitored
on the screen
1CH
2CH
QUAD-A
3 x 3
-19-
** VCR OUT **
ON
ON
ON
** SEQ SETUP **
QUAD SEQ
1: 4A
2SEC
2: 4B
2SEC
Pictures to be recorded
on the VCR
QUAD-A
3 x 3
QUAD-A and 3x3
are recorded
alternately.
QUAD-A
3 x 3
Advertisement
Table of Contents
