Panasonic WJ-MS488 Operating Instructions Manual page 16

Multiple surveillance cameras quad unit
Hide thumbs Also See for WJ-MS488:
Table of Contents

Advertisement

Note: All channel titles will be displayed in the same
position. You cannot specify a different position
for each title.
3-6-4. ALARM TITLE
This parameter lets you enable or disable "ALARM" dis-
play when the alarm is activated.
1. Move the cursor to ALARM TITLE .
2. Select ON or OFF.
ON: "ALARM" is displayed
OFF: "ALARM" is not displayed.
** TITLE SETUP **
CAM TITLE
TITLE SET *
TITLE POSI *
ALARM TITLE
STILL TITLE
ALARM
3-6-5. STILL TITLE
This parameter lets you enable or disable "STILL" dis-
play while a picture is paused.
1. Move the cursor to the STILL TITLE parameter.
** TITLE SETUP **
CAM TITLE
TITLE SET *
TITLE POSI *
ALARM TITLE
STILL TITLE
2. Select ON or OFF.
ON: "STILL" is displayed
OFF: "STILL" is not displayed
ON
ON
ON
ON
ON
ON
STILL?
STILL
3-7. CH SETUP
This parameter lets you select the position where the
camera picture will be displayed on the multiscreen.
Note: Before you set up the CH SETUP menu, setting of
the VCR OUT menu is required.
1. Move the cursor to CH SETUP.
SYSTEM SETUP *
ALARM BUZZER
ALARM OUT
ALARM AUTO RESET
SEQ SETUP *
TITLE SETUP *
CH SETUP *
2. Press the SET button. The CH SETUP menu appears
on the monitor screen.
1: 1CH
2: 2CH
3: 3CH
4: 4CH
5: 5CH
6: 6CH
7: 7CH
8: 8CH
9: OFF
1
2
4
5
7
8
3. Move the cursor to the number of the picture seg-
ment in the multiscreen by pressing the CURSOR
(C C
D D
A A
B B
,
,
,
) buttons.
4. Select the channel number to be assigned to the
selected picture segment by pressing the SELECT
(–, +) buttons.
5. Repeat steps 3 and 4 above to assign the other
channels to the picture segments.
6. Press the SET button to finalize channel assignment.
Notes:
• QUAD A consists of QUAD SET 1-4, and QUAD
B consists of QUAD SET 5-8.
• When OFF is selected, no picture is assigned to
that channel so that no picture is displayed on
the monitor screen.
• When OFF is selected, "CHXX LOSS" does not
appear for that channel on the monitor screen
when the video loss alarm is detected even
though the VIDEO LOSS parameter is ON.
-14-
** MAIN **
2SEC
2SEC
OFF
**CH SETUP**
3X3 SET
QUAD SET
1: 1CH
2: 2CH
3: 3CH
4: 4CH
5: 5CH
6: 6CH
7: 7CH
8: 8CH
3
1 (5)
6
3 (9)
9
2 (6)
4 (8)

Advertisement

Table of Contents
loading

Table of Contents