Table of Contents
Advertisement
2. Select QUADRANT or VARIABLE.
QUADRANT: When the playback multi picture
(QUAD-A, QUAD-B, or 3x3) is monitored, press-
ing a desired VIDEO SELECT (1, 2, 3, or 4) but-
ton switches the currently monitored multi pic-
ture to a twofold zoomed picture of the selected
fixed area.
The VIDEO SELECT (1, 2, 3, or 4) buttons select
the following fixed areas. See page 20 for oper-
ation.
No. 1
button
No. 3
button
VARIABLE: When the playback multi picture is
monitored, the position to be zoomed is selec-
table by pressing the CURSOR
EL-ZOOM mode.
See page 21 for operation.
Note: This function is available only when the
playback multi picture is monitored.
3-1-5-2. Zoom Title (ZOOM TITLE)
This parameter lets you enable or disable "ZOOM" dis-
play on the monitor screen when zoomed playback pic-
ture is monitored.
1. Move the cursor to ZOOM TITLE parameter.
2. Select ON or OFF.
ON: "ZOOM" is displayed.
OFF: "ZOOM" is not displayed.
Notes:
• Moving the title is not possible.
• When the camera title is displayed at the top of
the monitor screen, the zoom title is displayed in
the right bottom corner of the monitor screen.
** ZOOM SETUP **
ZOOM POSITION
ZOOM TITLE
No. 2
button
No. 4
button
(C C
D D
A A
B B
,
,
,
) in
QUADRANT
ON
ZOOM-PLAY
3-1-6. Startup Screen (START SCREEN)
This parameter lets you select a display pattern for your
startup screen. When the power is turned on, the picture
is displayed in the selected pattern.
1. Move the cursor to the START SCREEN parameter.
BORDER
VCR OUT *
AUTO SKIP
VIDEO LOSS
ZOOM SETUP *
START SCREEN
PLAY TITLE
STILL-SEL TITLE
2. Select a desired pattern.
QUAD-A: The QUAD-A picture is displayed. You
can select channels to be displayed for QUAD-
A on the CH SETUP menu. See page 14 for
details.
QUAD-B: The QUAD-B picture is displayed. You
can select channels to be displayed for QUAD-
B on the CH SETUP menu. See page 14 for
details.
3x3: Nine screen segments (3x3) are displayed.
FULL: A full-size single picture is displayed.
1-SEQ: A sequence of a full-size single picture is
displayed.
4-SEQ: A sequence of quad pictures is displayed.
Note: If you select QUAD-A, QUAD-B, or 3x3 on the
START SCREEN menu, set the selected para-
meter to ON on the VCR OUT menu. When OFF
is selected on the VCR OUT menu, the parame-
ter selected on the START SCREEN menu will
be automatically changed to ON on the VCR
OUT menu.
3-1-7. Play Title (PLAY TITLE)
This parameter lets you enable or disable "PLAY" dis-
play on the monitor screen when playback picture is
monitored.
1. Move the cursor to the PLAY TITLE parameter.
BORDER
VCR OUT *
AUTO SKIP
VIDEO LOSS
ZOOM SETUP *
START SCREEN
PLAY TITLE
STILL-SEL TITLE
2. Select ON or OFF.
ON: "PLAY" is displayed.
OFF: "PLAY" is not displayed.
Note: Moving the title is not possible.
-10-
** SYSTEM SETUP **
WHITE
OFF
OFF
3x3
ON
ON
** SYSTEM SETUP **
WHITE
OFF
OFF
3x3
ON
ON
Advertisement
Table of Contents
