Table of Contents
Advertisement
11. Video Output Connector (VIDEO OUT)
The video signal selected by the ALARM RESET/
QUAD SHIFT/MULTISCREEN button (quad or 3x3)
or the VIDEO SELECT button (full-size single pic-
ture) is supplied to the Video Monitor from this con-
nector.
12. VCR Output Connector (VCR OUT)
The video signal for the multi picture mode (QUAD-
A, QUAD-B, or 3x3) is always provided at this con-
nector. By connecting it to the VIDEO IN connector
of the VCR, you can record the quad or 3x3 picture.
13. Gen-Lock In Connector (GENLOCK IN)
The VS signal (B/W composite signal or composite
sync signal) is supplied to this connector for exter-
nal synchronization.
14. Gen-Lock Out Connector (GENLOCK OUT)
The VS signal (B/W composite signal or composite
sync signal) connected to the Gen-Lock In connec-
tor is looped through to this connector. The connec-
tor connected with a coaxial cable to this connector
cancels the termination.
15. Play Input Connector (PLAY IN)
The playback signal from the VCR is supplied to this
connector.
16. Alarm/Remote Control Connector
(ALARM/REMOTE)
This connector accepts the alarm signal from asso-
ciated alarm sensor units or the remote control sig-
nal from the external equipment. See page 25 for
details.
17. RS232C Connector (RS232C)
Connecting a PC to this connector will allow you to
remote control the monitor.
18. Ground Terminal (GND)
19. Power Cord
-5-
Advertisement
Table of Contents
