Table of Contents
Advertisement
(3) Cursor
Item
Cursor Movement
Select Parameter
*3 The parameter valid on the main unit setup menu is:
mm=UU, DD, RR, LL, ES,IC, DC
The parameter valid for zoom position move during electronic zooming is:
mm=UU, DD, RR, LL
Notes:
• When you operate with the buttons on the front panel before finishing data processing commanded by PC, this unit puts
the operation by the buttons above the operation by PC.
• If commands are sent by PC continuously, transmission error occurs infrequently. When it occurs and commands are
not executed, send the unexecuted commands again.
Command (ASCII)
Response Command (ASCII)
DCR : mm
DCR
mm=UU
mm=DD
mm=RR
mm=LL
mm=ES
mm=IC
mm=DC
-28-
Parameter (ASCII)
Move Upward
Move Downward
Move to Right
Move to Left
Previous Directory
(ESC)
Select parameter (+)
Select parameter (–)
*3
Advertisement
Table of Contents
