Power Plug - Schwinn 112 Parts List, Full Size Hardware Chart, Product Illustration, Assembly Instructions

2. Place the COMPUTER (#1) on top of the COMPUTER/HANDLEBAR MAST
(#6). The reading rack should wrap around the bottom of the computer console.
3. Attach the COMPUTER to the COMPUTER/HANDLEBAR MAST with the 4
COMPUTER MOUNTING SCREWS (#4).
4. Fasten WATER BOTTLE CAGE (#20) to COMPUTER SUPPORT TUBE (#6)
with the two WATER BOTTLE SCREWS (#19) and tighten screws.
5. Insert WATER BOTTLE (#18) into WATER BOTTLE CAGE.
6. Insert the POWER PLUG (#67) into the wall and the other end into the POWER
INPUT (#68) located at the rear of the MAIN UNIT (#14) just above the FRONT
STABILIZER TUBE (#12)
You're finished and now you can begin to reach your fitness goals!
Please reference the Owner's Manual for information regarding computer
operation, product maintenance, Warranty information, and general fitness and
exercise guidelines.
Schwinn Customer Service
1.800.864.1270
That's it!
page:15/16