Changing The Exposure And Original Image Type; Changing The Exposure And Original Image; Type - Sharp MX-2301N Quick Start Manual

CHANGING THE EXPOSURE AND
ORIGINAL IMAGE TYPE
Exposure and original image type settings can be selected as appropriate for the original.
The procedure for darkening the exposure and setting the original image type to "Text/Prtd. Photo" is explained
below.
The side to be scanned must be face up!
Scan
Auto
Mode Switch
Exposure
Job Detail
(2)
Settings
200X200dpi
(1)
Resolution
Send Settings
Auto A4
Special Modes
Original
When Fax/I-Fax address is included,
exposure setting shared is selected,
and Original Image Type is disabled.
Scan
Moiré Reduction
Exposure
Manual
5
1 3
(5)
Mono2/Auto Address Book
Colour Mode
Address Entry
TIFF/JPEG
File Format
Special Modes
File
Quick File
OK
(3)
OK
(6)
1 2
Auto Text
Text/
Text/Photo
Prtd.Photo
(4)
Printed
Photo
Text
Photo
1
Place the originals.
When using the document glass, place the
original with the side to be scanned face down.
2
Select settings in the touch panel.
(1) Touch the [Job Detail Settings] key.
(2) Touch the [Exposure] key.
(3) Read the displayed message and
touch the [OK] key.
(4) Touch the [Text/Prtd. Photo] key.
(5) Darken light colours with the
key.
5 levels are available for the exposure.
Darken light originals with the
and lighten dark originals with the
key.
(6) Touch the [OK] key.
3
Select the destination and then press
the [COLOUR START] key or the
[BLACK & WHITE START] key.
key,
Cancel scanning
77