Setting Time (Clock Adjust); Switching Demonstration Screen Display (Demo) - Eclipse CD5030 Owner's Manual

Various Settings

Setting time (Clock Adjust)

This main unit uses the 12-hour display notation.
Select "Clock Adjust" by pressing
1
the [ ] or [ ] button.
2
Press the [ENTER] button.
The clock setting mode is activated.
Select the item to be adjusted by
3
pressing the [<] or [>] button.
[>]:
Minutes will be switched.
[<]:
Hours will be switched.
Adjust the time by pressing the [ ]
4
or [ ] button.
[ ]:
Turns the time forward.
[ ]:
Turns the time back.
5
Press the [ENTER] button.
80
Switching demonstration screen
display (Demo)
Demonstration screen display settings can be
performed.
Default setting is ON. If the demonstration screen
display is set to ON, operation, motion picture,
and other screens
succession.
If you press a button while the demonstration
screens are being displayed, the demonstration
screens will be cancelled and the audio operation
screen will be displayed. If you do not operate
the status display function within 15 seconds, the
display will return automatically to the demo
screen.
Select "Demo" by pressing the [ ]
1
or [ ] button.
2
Press the [ENTER] button.
The demo display setting mode is
activated.
Select "ON/OFF" by pressing the
3
[ ] or [ ] button.
will be displayed in