Setting The Clock - Eclipse ESN E3 High-Power CD Receiver with CDC/E-COM/DSP Control and Wireless Remote Model: 54420 Owner's Manual

[DISP] button
[AUDIO CONTROL] button

Setting the clock

This receiver uses the 12-hour, A.M./P.M.display notation.
1 . Press the [DISP] button repeatedly to switch to the
clock display mode.
2 . To adjust the hour, press either button [1] or [2]
while holding the [DISP] button down.
Button [1]: Turns the hour back.
Button [2]: Turns the hour forward.
3 . To adjust the minutes, press either button [3] or [4]
while holding the [DISP] button down.
Button [3]: Turns the minutes back.
Button [4]: Turns the minutes forward.
• To set the clock to 0 minutes, 0 seconds (an exact hour),
press button [5], while holding down the [DISP] button.
For example:
At 3:23: Pressing button [5] returns to 3:00.
At 3:32: Pressing button [5] advances to 4:00.
Buttons [1] to [5]
Basic operation
23