Paging; Key Lock; Alarm - ClearSounds iConnect A6BT Operating Manual

stop the flashing light. When you are ready to connect, you
can turn it on again.
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press up
press the Select soft key.

Paging

█
You can page the handset from the base unit to help locate the
handset. Press
and the handset will ring for about 1 minute. To stop paging,
press on the base again or press any key on the handset.
NOTE: If you hold
will enter registration mode.

Key Lock

█
You can lock all keys on the keypad except for the M1 – M4
and SOS memory dial keys. While in locked mode, the handset
still can be answered by pressing
Bluetooth wireless headset). When you hang up, the handset
will return to the locked mode.
To lock the keypad, in standby mode, press and hold
the display shows "HS Locked" and the
To unlock the keypad, press and hold
disappears.
While in locked mode, if you press any key, the phone will
generate a warning tone and "HS Locked" will be displayed.

Alarm

█
You can set an alarm on the handset (the alarm also supports
the snooze function). To set the alarm:
1. Press the Menu soft key to display the main menu list.
2. Press up
or down
or down
on the base (hold for less than 5 seconds)
for more than 5 seconds, the base
or down
45 – ENGLISH
to scroll to Bluetooth and
to scroll to On or Off and then
or (if you are using a
icon appears.
until the
to scroll to HS Settings and
until
icon