Auto Answer Setting - ClearSounds iConnect A6BT Operating Manual

4. Enter the PIN (the default PIN is 0000) and then press
the Select soft key. If the PIN is validated, the display
will show Confirm, and the handset settings will be reset
to the initial factory settings.
5. Press the Select soft key to confirm.
Out of Range Alarm
█
This function allows you to know when the handset is out of
range of the base, and a beep will sound. Your ClearSounds
iConnect A6BT comes from the factory preset for Out of Range
Alarm ON. To change this setting:
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press up
then press the Select soft key.
4. Press down
the Select soft key.
5. Press up
press the Select soft key.

Auto Answer Setting

█
Your ClearSounds
preset for Auto Answer set to OFF. With this feature turned
on, when the phone is in the base, you can answer a call by
simply picking up the handset from the base. You do not
need to press any key to answer. To change this setting:
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press up
then press the Select soft key.
4. Press up
disable the function and then press the Select soft key.
or down
or down
to select Range Alarm and then press
or down
iConnect A6BT comes from the factory
®
or down
or down
or down
28 – ENGLISH
to scroll to HS Settings and
to scroll to Tone Setup and
to select On or Off and then
to scroll to HS Settings and
to scroll to Auto Answer and
to select On or Off to enable/
®