Additional Functions; Bluetooth Wireless Headset - ClearSounds iConnect A6BT Operating Manual

ADDITIONAL FUNCTIONS

Bluetooth Wireless Headset

█
The ClearSounds iConnect A6BT phone can use a built-in short-
range Bluetooth® wireless signal to pair and connect with a
Bluetooth wireless headset. Once the headset is paired and
connected, you can use the headset within 9 feet (3 meters)
of the phone to place or receive calls.
Overview: How to use a Bluetooth headset with the phone
1. Turn on the Bluetooth feature in your headset (consult
the headset user's guide, if necessary).
2. Pair and connect the headset with the handset (For
instructions, see the following sections). You need to
pair and connect only once.
3. Depending on your use model, take one of these steps
between calls:
• If you prefer to keep the headset always connected
to the handset and ready for use: Keep the headset
on, keep Bluetooth on in the handset, and keep the
handset and the headset charging.
• If you prefer to use the headset only sometimes:
Use the handset menus to turn off Bluetooth in the
phone (For instructions, see "Turning on or off
Bluetooth in the handset," in a following section.)
When you are ready to use the headset again, be sure
the headset is on, and then turn on Bluetooth in the
handset.
Pairing the headset
You can pair up to eight Bluetooth devices with your handset.
You must pair a headset with your phone only once. After
pairing, you must connect the headset with your phone (for
instructions, see "Connecting the headset," in the following
section).
1. Turn on the Bluetooth feature in your headset (consult
42 – ENGLISH