Installing Batteries - ClearSounds iConnect A6BT Operating Manual

Dect 6.0 amplified cordless phone with bluetooth
Table of Contents

Advertisement

Installing Batteries

Three AAA re-chargeable Ni-MH batteries come with your
phone. You must install the batteries before using your phone.
1. Remove the battery compartment cover by sliding it
downwards.
2. Insert the new batteries. Be sure to observe battery
polarity as imprinted on the inside of the compartment.
3. Replace the battery compartment cover by sliding
upward until it clicks into place.
NOTE: The batteries need to be replaced if they do not recover
their full storage capacity after recharging. Check the battery
icon on the LCD to see the battery charge level. When replacing
the batteries, always use good quality Ni-MH AAA re-chargeable
batteries.
15 – ENGLISH

Advertisement

Table of Contents
loading

Table of Contents