NETGEAR FVL328 Reference Manual page 79

Table 6-1. VPN Manual Policy Configuration Fields
Field
SPI - Outgoing
Enable Encryption
Encryption
Algorithm
Key - In
Key - Out
Enable Authentication
Authentication
Algorithm
Key - In
Key - Out
NetBIOS Enable
Virtual Private Networking
Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual
Description
Enter a Hex value (3 - 8 chars). Any value is acceptable, provided the remote
VPN endpoint has the same value in its "Incoming SPI" field.
Use this check box to enable or disable ESP Encryption.
If you enable ESP Encryption, then select the Encryption Algorithm:
• DES - the default
• 3DES -more secure
Enter the key in the fields provided.
• For DES, the key should be 8 characters.
• For 3DES, the key should be 24 characters.
Any value is acceptable, provided the remote VPN endpoint has the same
value in its Encryption Algorithm "Key - Out" field.
Enter the key in the fields provided.
• For DES, the key should be 8 characters.
• For 3DES, the key should be 24 characters.
Any value is acceptable, provided the remote VPN endpoint has the same
value in its Encryption Algorithm "Key - In" field.
Use this check box to enable or disable ESP authentication for this VPN policy.
If you enable authentication, then use this menu to select the algorithm:
• MD5 – the default
• SHA1 – more secure
Enter the key.
• For MD5, the key should be 16 characters.
• For SHA-1, the key should be 20 characters.
Any value is acceptable, provided the remote VPN endpoint has the same
value in its Authentication Algorithm "Key - Out" field.
Enter the key in the fields provided.
• For MD5, the key should be 16 characters.
• For SHA-1, the key should be 20 characters.
Any value is acceptable, provided the remote VPN endpoint has the same
value in its Authentication Algorithm "Key - In" field.
Check this if you want NetBIOS traffic to be forwarded over the VPN tunnel.
The NetBIOS protocol is used by Microsoft Networking for such features as
Network Neighborhood.
M-10144-01
6-13