NETGEAR FVL328 Reference Manual page 173

– Type the LAN Subnet Mask of Gateway B (255.255.255.0 in our example) in the Local IP
Subnet Mask field.
Figure F-10: NETGEAR FVL328 VPN – Auto Policy (part 2)
– From the Traffic Selector Remote IP drop-down box, select Subnet address.
– Type the starting LAN IP Address of Gateway A (10.5.6.1 in our example) in the Remote
IP Start IP Address field.
– Type the finishing LAN IP Address of Gateway A (0.0.0.0 in our example) in the Remote
IP Finish IP Address field.
– Type the LAN Subnet Mask of Gateway A (255.255.255.0 in our example) in the Remote
IP Subnet Mask field.
– From the AH Configuration Authentication Algorithm drop-down box, select MD5.
– Select Enable Encryption in the ESP Configuration Enable Encryption check box.
– From the ESP Configuration Encryption Algorithm drop-down box, select 3DES.
– Select Enable Authentication in the ESP Configuration Enable Authentication check box.
– From the ESP Configuration Authentication Algorithm drop-down box, select MD5.
– Select NETBIOS Enable in the NETBIOS Enable check box.
Click the Apply Button. You will be taken back to the VPN Policies Menu page.
5.
NETGEAR VPN Configuration FVS318 or FVM318 to FVL328
Model FVL328 ProSafe High-Speed VPN Firewall v2 Reference Manual
M-10144-01
F-9