NETGEAR FVL328 Reference Manual page 211

For this example, ensure that the following settings are configured:
b.
– In the Select Phase 1 Negotiation Mode menu, select Aggressive Mode.
– Select the Enable Perfect Forward Secrecy (PFS) check box.
– In the PFS Key Group drop-down list, Diffie-Hellman Group 2.
– Select the Enable Replay Detection check box.
Configure the Connection Security Policy
5.
In this step, you will provide the authentication (IKE Phase 1) settings, and the key exchange
(Phase 2) settings. The setting choices in this procedure follow the VPNC guidelines.
Figure H-10: Connection Security Policy Authentication (Phase 1)
Configure the Authentication (Phase 1) Settings.
a.
• Expand the Security Policy heading, then expand the Authentication (Phase 1)
heading, and click on Proposal 1.
• For this example, ensure that the following settings are configured:
– In the Encrypt Alg menu, select Triple DES.
– In the Hash Alg, select SHA-1.
– In the SA Life, select Unspecified.
– In the Key Group menu, select Diffie-Hellman Group 2.
NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router
Reference Manual for the NETGEAR ProSafe VPN Client
202-10015-01
H-11