Product Hardware Features - TRENDnet TV-IP252P User Manual

TRENDnet User's Guide

Product Hardware Features

Ethernet/PoE Port: Connect the provided network cable (RJ-45 type). The

connector supports Power over Ethernet standard (PoE), enabling the camera to
be powered by the Ethernet.
 Power: Connect the provided power adapter to supply power to the camera if
not using PoE.
GPIO: Connected the provided external GPIO connector to the device, and

then connect the external device (such as motion detection, event triggering or
alarm system) to GPIO adapter.
 BNC connector: Connect the external monitor to BNC connector
 Mic In: Connect an external microphone.
Speaker Out: Connects an external speaker.

© Copyright 2012 TRENDnet. All Rights Reserved.
Inside Component
Lens Focus Adjustment: Adjust the focus either clockwise or counter

clockwise.
Reset button: Press the button to restart the camera. Press and hold the

button for five seconds, the camera will resume the factory default settings.
 LED indicators: Indicates the camera is powered on with the steady
amber light and the link activity with blinking green light
 Link & Power switches:
The two switches allow you to manually turn of the LED indicators.
TV-IP252P
3