Configuring The Camera Setting - TRENDnet TV-IP252P User Manual

TRENDnet User's Guide

Snapshot allows you to capture and save a still image*.

Browse allows you to assign the destination folder to store the video clips and
still images*.

Talk allows you to speak out through the camera. Please note only one user is
allowed to use this function at a time.

Listen allows you to receive the on-site sound and voice from the camera.

Trigger Out allows you to trigger on/off the GPIO output manually.

Live View: The Live View Image window displays the real-time image of the
connected camera.

The current compression mode of image is displayed above the Live View
Image window.

Click the Zoom In buttons
in the live view image by 1x, 2x, or 3x.

Camera Information: Displays the camera's location and the current date & time.
The information can be modified in the Web Configuration.
If you are using Microsoft 7/Vista platform, you may not be able to find the

recorded files by Snapshot or Manual Record. You will need to disable the
protected mode of Security in the IE browser before recording a video file or taking
a snapshot.
Please follow the below steps:
1. Open IE Browser then select Tools  Internet Options
2. Select Security
3. Uncheck the "Enable Protected Mode" then press OK
© Copyright 2012 TRENDnet. All Rights Reserved.
above the Live View Image window to zoom

Configuring the Camera Setting

To configure the camera, click
Configuration. The Web Configuration will start from the Basic page.
The Web Configuration contains the settings in the left menu bar, including Smart
Wizard, Basic, Network, Video/Audio, Event Server, Motion detect, Event Config, Tools,
and Device Info.
TV-IP252P
on the Main screen of Web
11