TRENDnet TV-IP252P User Manual page 18

TRENDnet User's Guide
 UPnP Port Forwarding: select this option to have the port forward to router.
 Bonjour: The devices with Bonjour will automatically broadcast their own
services and listen for services being offered for the use of others. If your browser
with Bonjour, you can find the camera on your local network without knowing its
IP address.
The Apple Safari is already with Bonjour. You can download the complete Bonjour
for Internet Explorer browser from Apple's web site by visiting
http://www.apple.com/bonjour/.
 Ports Number
- HTTP Port: The default HTTP port is 80.
- RTSP Port: Configure the transmission of streaming data within the network.
The default RTSP (Real Time Streaming Protocol) port is 554.
NOTE: If the camera is behind an NAT router of firewall, the suggested to be used is from
1024 to 65535.
Network >> IP Filter
The IP Filter setting allows the administrator of the camera to limit the users within a
certain range of IP addresses to access the camera.
To disable this feature, select the Disable option; otherwise, select the Accept
option to assign the range of IP addresses that are allowed to access the camera, or
© Copyright 2012 TRENDnet. All Rights Reserved.
select the Deny option to assign the range of IP addresses that are blocked to access
the camera.
 Disable: Select this option to disable the IP Filter function of the camera.
 Accept
- Assign a range of IP addresses that are allowed to access the camera by
entering the Start IP address and End IP address options. When you are
finished, click Add to save the range setting. You can repeat the action to
assign multiple ranges for the camera.
For example, when you enter 192.168.10.50 in Start IP Address and
192.168.10.70 in End IP Address, the user whose IP address located within
192.168.10.50 ~ 192.168.10.70 will be allowed to access the camera.
 Accept IP List: The list displays the range setting(s) of IP addresses that are
allowed to access the camera. To clear the setting, select a range of IP
addresses from the list and click Delete.
 Deny
- Assign a range of IP addresses that are blocked to access the camera by
entering the Start IP address and End IP address options. When you are
finished, click Add to save the range setting. You can repeat the action to
assign multiple ranges for the camera.
For example, when you enter 192.168.10.50 in Start IP Address and
192.168.10.70 in End IP Address, the user whose IP address located within
192.168.10.50 ~ 192.168.10.70 will not be allowed to access the camera.
 Deny IP List: The list displays the range setting(s) of IP addresses that are
blocked to access the camera. To clear the setting, select a range of IP
addresses from the list and click Delete.
TV-IP252P
17