TRENDnet TV-IP252P User Manual page 10

TRENDnet User's Guide
5. After installing the IPSetup utility, the application is automatically installed to
your computer, and creates a folder in Start\Program\TRENDnet\IPSetup.
6. Click Start>Programs>TRENDnet>IPSetup, and then click IPSetup.
7. The IPSetup window will appear. It will search for the camera within the same
network.
Camera Display Area
© Copyright 2012 TRENDnet. All Rights Reserved.
Camera Display Area: By default, the IP setting on the Camera is set to DHCP.
-
If you have DHCP server, the camera will automatic get the IP address from
DHCP server. If you do not have DHCP server on your network, it will show the
default IP as 192.168.10.30. Double click the IP address; it will link to Camera's
Web Configuration page.
- Change IP: Click this button to bring up the following window. It allows you to
change the IP Address. You can select either Static IP or click DHCP. Then,
enter the Administrator ID & Password. By default the ID/Password is: admin.
When complete, click Change.
- Search: Click this button to search the connected camera in the same network
- Exit: Click this button to exit the program.
TV-IP252P
9