TRENDnet TV-IP262PI User Manual
  1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Security Camera
  5. TV-IP262PI
  6. User manual

TRENDnet TV-IP262PI User Manual

Megapixel poe day/night dome internet camera
Hide thumbs Also See for TV-IP262PI:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for TRENDnet TV-IP262PI

Summary of Contents for TRENDnet TV-IP262PI

  • Page 2: Table Of Contents

    Event Server......................... 22 Motion Detect ......................25 Event Config ......................... 26 Tools ..........................28 SD Card ........................28 Device Info ........................30 How to setup/access the camera behind a Router ......31 Technical Specifications..............34 © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 3: Product Overview

    Product Overview Features The Megapixel PoE Dome Internet Camera with IR (model TV-IP262PI) is an indoor, enterprise class surveillance camera capable of transmitting H.264 video at up to 1280 x 1024 resolution. View and manage the tamper resistant dome IP camera from any computer with an internet connection.

  • Page 4: Product Hardware Features

    * The connector supports Power over Ethernet standard, enabling the camera to be powered by the Ethernet.  Mic In: Connect an external microphone .  Line Out: Connects an external active speaker. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 5: Application Diagram

    TRENDnet User’s Guide Application Diagram Inside Component  LED indicators Power: Indicate the camera is powered on with the steady amber light. Link: Indicate the camera’s network connectivity with the flashing green light. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 6: Installation

    If the image quality is poor, you have to disassemble the Dome cover to adjust the lens focus until the desired image appears clearly. 5. Put the Dome cover back and secure with four screws. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 7: Camera Installation

    4. Connect one end of the power adapter into the Power Connector, then click on Next. Please click Next if you are using the PoE injector or switch. 2. lick the Install Camera. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 8 You MUST change the default password of the camera. Enter the default password: admin, Enter your new password: must be between 8 and 32 characters. (Alphanumeric: 6. Wait while camera is searching. a-z, A-Z,0-9 © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 9 9. Type in the new and confirm the new password by entering the password 11. You can also click Finish to exit the program or click Home return to the main twice. screen. 10. Click TV-IP262P to access to the camera web page. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 10: Starting Camera Finder

    Installation CD-ROM, allowing you to search the camera on your network easily. 1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the Auto-Run program. 3. When the Completing the IPSetup Setup Wizard appears, click Finish. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 11 4. After installing the IPSetup utility, the application is automatically installed to Camera Display Area: By default, the IP setting on the Camera is set to DHCP. your computer, and creates a folder in Start\Program\TRENDnet\IPSetup. If you have DHCP server, the camera will automatic get the IP address from DHCP server.

  • Page 12: Configuration

    Permission request depends on the Internet security settings of your computer. Click Yes to proceed. The Main screen of the Web Configuration provides you with many useful information and functions, including: © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 13: Configuring The Camera Setting

    1x, 2x, 3x, 1/2, 1/4, or full screen Camera Information: Displays the camera’s location and the current date & time. The information can be modified in the Web Configuration. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 14: Smart Wizard

    Gmail®, Yahoo®, Hotmail®), please enter the SMTP server address and the corresponding information from the service provider.  IP Setting Select the IP setting according to your network: DHCP, Static IP, or PPPoE. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 15: Basic

    Apply to finish the wizard and reboot the camera. Otherwise, click Prev to go back to the previous step(s) and change the settings; or click Cancel to end the wizard and discard the changes. Basic >> System © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 16 User Name: Enter the guest’s name you want to add to use the camera. Password: Enter the password for the new guest. UserList: Display the existing guests of the camera. To delete a user, select the one you want to delete and click Delete. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 17: Network

    H.264 Mode http://camera_ip_address:port number/h264view.htm MPEG4 Mode http://camera_ip_address:port number/mpgview.htm MJPEG Mode http://camera_ip_address:port number/jpgview.htm NOTE This feature is enabled by default, and for security reason, it is recommended to have the feature enabled at all time. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 18 NOTE: If the camera is behind an NAT router of firewall, the suggested to be used is from default setting is 255.255.255.0. 1024 to 65535. Default Enter the Default Gateway of the camera. The © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 19 RTSP link prompts for authentication. Username/password are encrypted during data transmission. TRENDnet recommends using RSTP Digest authentication method. Disable and Basic methods pose security risks. Please verify if your RTSP client supports RSTP authentication method selected. Multicast settings: Configure the following settings so that you can deliver information from your camera to a set of receivers.

  • Page 20: Video & Audio

    IPv6: Enter the IP Address that is allowed to access the camera. Deny IPv4: Assign a range of IP addresses that are blocked to access the camera by entering the Start IP address and End IP address options. When you are © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 21 Light Frequency: Select the proper frequency according to the camera’s location 50Hz or 60Hz. AE Enable: Enable or disable the AE (Auto Exposure) control.  Night mode: Change night mode to color or Mono © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 22 (with the default player on the phone) by entering the RTSP link:  Image Overlay: This item allows you to set the image overlay. rtsp://(IP address of the camera)/3gp. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 23: Event Server

    When you complete the required settings for HTTP Notify for Motion Trigger, FTP, Email, color. Network Storage, or Instant Message, click Test to test the related configuration is correct or not. Once the camera connects to the server successfully, click Apply. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 24 Pre-event (0 ~ 3) seconds and Post-event (0 ~ 3) seconds. The Pre-Event or Post-Event only works when video resolution set Port: NOTE: up to 720P or lower. It will not work with SXGA resolution. Query: xxx.cgi?name1=value1&name2=value2 Example: cgi/event.cgi?status=#s&time=#t&model=modelname Result: http://192.168.10.1:80/cgi/event.cgi?status=#s&time=#t&model=modelname © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 25 (TLS or SSL) connection. Samba Server Address: Enter the IP address of the Network Storage server. Share: Assign the folder on the Network Storage server to share the files to users. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 26: Motion Detect

    Threshold bar to the left will increase the sensitivity of motion detection. Manually Specify Server Host/Port: Select the Enable option to manually configure the Jabber server settings. Jabber Server Address: Enter the Jabber server address manually. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 27: Event Config

    After entering the profile name, click OK and the profile is added to the Schedule Profiles list. To delete the profile, select the profile in the list and click Delete. Event Configuration >> General Setting  General © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 28 Schedule Profile: Select a schedule profile from the pull-down list. Action: Select the destination that the captured images will be sent to: Record to SD Card, Record to Network Storage, Send Email, FTP Upload, or Instant Message. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 29: Tools

    Whenever you want to resume the original settings, you can restore them by retrieving the backup file. Backup: Click Get the backup file to save the current configuration of the camera. Restore: Click Browse to locate the backup file and then click Restore. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 30 Folder when the storage space on the SD card is full. Encode Format: Select MPEG4 or H.264 as the encode format while recording. File Format: Select MP4 or AVI as the file format while recording. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 31: Device Info

    Display the Basic, Video & Audio, and Network settings of the camera. The Information menu displays the current configuration and events log of the camera. Information >> System Log The Logs table displays the events log recorded by the system. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 32: How To Setup/Access The Camera Behind A Router

    4. Open another web browser and go to your Router’s Web Configuration page. How to setup/access the camera behind a Router (In the example, TRENDnet’s TEW-651BR Wireless N router is used) You can either setup the Dynamic DNS connection via camera itself or your home router.
  • Page 33 * Please refer to your router’s user’s manual for detail Virtual Server setting. Some router might use Port Forwarding or Special applications for this camera and click Apply. function. The setup steps should be very similar. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 34 Some router might use Port Forwarding or Special applications for this function. The setup steps should be very similar. 6. Open another web browser and enter your DDNS domain and camera’s port number. http://yourDomainName:PortNumber 7. The camera login page will appear. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 35: Technical Specifications

    Storage: -15C ~ 60C (5F ~ 140F) S/N: 65dB Humidity Max. 90% (non-condensing) Format: PCM/AMR Certifications CE, FCC Pan/Tilt Manually adjust camera to final fixed position: (Manually) Pan: -175° ~ +175° Tilt: 20 ~ 90° © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 36 Store video file to SD card or storage device Send Instant message to Jabber client via Jabber server Overlay Text overlay: time, date, and text Mask overlay: define up to 2 opaque boxes to conceal portions of the recording area DSCP © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 37 The firewall may need to have some settings changed in order for the Network Camera to be accessible outside your local LAN. For more information, please refer to the section about setting up/accessing your camera behind a router. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 38 Make sure that your computer’s display properties are set to at least 1 6-bit color. Using 16 or 256 colors on your computer will produce dithering artifacts in the image, making the image look as if it is of poor quality. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 39 AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. OR USE OF TRENDNET’S PRODUCTS. If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND and deliver an equivalent product or part to the customer.
  • Page 40 Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. Please go http://www.gnu.org/licenses/gpl.txt...

Table of Contents