Kenwood DNX5350BT Quick Start Manual page 26

Hide thumbs Also See for DNX5350BT:
Table of Contents

Advertisement

When installing the antenna on the left
side
=
Earth sheet
Match the protrusion with 5
NOTE
• Do not touch the feeder terminal or the
pasting surface (adhesive side) of the
amplifier.
8) Remove the film covering the earth sheet
and paste the earth sheet on the metal part
of the vehicle.
=
NOTE
• Provide sufficient leeway for the earth sheet
so that it does not interfere with the interior
parts (front pillar cover).
Also take care that the interior parts do not
interfere with the amplifier (accessory =).
9) Wire the antenna cables.
Use cord clamper (accessory ~) to secure the
antenna to the pillar at several locations.
26
ñ English
-
Front glass
Front pillar
Interior part
Earth sheet
NOTE
• Take the following precautions when passing
the antenna cable inside the front pillar where
the air bag is installed.
– Install the amplifier part of the antenna
cable in front or above the air bag so that
the antenna and the air bag do not interfere.
=
– The front pillar cover is secured with a
special clip which may need to be replaced
when the front pillar cover is removed.
Contact your vehicle dealer for details
on replacing the front pillar cover and
availability of replacement parts.
Interior part
Air bag
Front pillar
Clip

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dnx535vbtDnx5350dab

Table of Contents