Kenwood DNX890HD Quick Start Manual
  1. Manuals
  2. Brands
  3. Kenwood Manuals
  4. GPS
  5. DNX890HD, DNX7700BT, DNX690HD,
  6. Quick start manual

Kenwood DNX890HD Quick Start Manual

Gps navigation system
Hide thumbs Also See for DNX890HD:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
GPS Navigation System.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or
service on the product.
Model DNX890HD/ DNX7700BT/ DNX690HD/ DNX570HD/ DNX5080EX/ DNX5700BT Serial number
US Residence Only
Register your Kenwood product at www.Kenwoodusa.com
© 2012 JVC KENWOOD Corporation
DNX890HD
DNX7700BT
DNX690HD
DNX570HD
DNX5080EX
DNX5700BT
GPS NAVIGATION SYSTEM

Quick Start Guide

Register Online
B59-2176-00/00 (K/K2/R)

Advertisement

Table of Contents
loading

Related Manuals for Kenwood DNX890HD

Summary of Contents for Kenwood DNX890HD

  • Page 1: Quick Start Guide

    Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.

  • Page 2: Table Of Contents

    Installation Procedure In this manual, each model name is Before Installation __________________ 22 abbreviated as follows. Installation Procedure _______________ 23 DNX890HD: Removing Procedure ________________ 26 DNX7700BT: DNX690HD: Connection ________________________ 27 DNX570HD, DNX5700BT, and About this Unit _____________________ 30...

  • Page 3: Precautions

    Precautions on using this unit Precautions on handling discs When you purchase optional accessories, check with your Kenwood dealer to make sure that Do not touch the recording surface of the disc. they work with your model and in your area.

  • Page 4: Cleaning The Unit

    Quick Start Guide Acquiring GPS signal How to Reset Your Unit The first time you turn on this unit, you must If the unit or the connected unit fails wait while the system acquires satellite signals to operate properly, reset the unit. for the first time.

  • Page 5: Safety Precautions And Important Information

    Kenwood Car Navigation System and follow the instructions in this manual. Neither Failure to avoid the following potentially Kenwood nor Garmin shall be liable for problems hazardous situations may result in injury or or accidents resulting from failure to observe the property damage.

  • Page 6: First Step

    Quick Start Guide irst Step Touch the corresponding key and set the value. Power on the unit and perform some setup steps before using. Press the <MENU> button. Language Select the language used for the control screen and setting items. Default is “American English (en)”.
  • Page 7 DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT OEM SETUP (North America Sales area only) This function requires a commercial adaptor. Consult your Kenwood dealer for details. Touch [Finish]. NOTE For details on operations of each setting, refer to the Instruction Manual.

  • Page 8: Basic Operations

    Quick Start Guide asic Operations Functions of the Buttons on the Front Panel DNX890HD/DNX7700BT 7 8 9 How to insert an SD Card 1) Press < > button for 1 second. Labelled The panel fully opens. side 2) Hold the SD card as the illustration in the right and insert it into the slot until it clicks.
  • Page 9 DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT Number Name Motion fi (Reset) If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.119). Switches attenuation of the volume on/off. North America Sales area: Pressing for 1 second stores the tag data of the current music from HD Radio tuner or SiriusXM (Instruction Manual P.64).
  • Page 10 Quick Start Guide DNX690HD/DNX570HD/DNX5080EX/DNX5700BT How to insert a microSD Card 1) Open the microSD card slot cover as the illustration in the right. 2) Hold the microSD card with the label facing up and the notched section right, and insert it into the slot until it clicks.
  • Page 11 DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT Number Name Motion Disc insert A slot to insert a disc media. slot 0 (Eject) Ejects the disc. Pressing for 1 second ejects the disc forcibly. fi (Reset) If the unit or the connected unit fails to operate properly, the unit returns to factory settings when this button is pressed (Instruction Manual P.119).

  • Page 12: Common Operations

    Quick Start Guide Common Operations General There are some functions which can [Menu] Returns to the Top Menu screen. be operated from most screens. Touching for at least 1 second displays the Screen Control screen. (Even when an image is dispalyed, touching for at least 1 second displays the Screen Control screen.) (RETURN) Returns to previous screen.

  • Page 13: How To Use The Navigation System

    You can get additional information about using the navigation system from Help. To display Help, touch [Apps] and then touch [Help]. For more information about your navigation system, download the latest version of the Owner’s Manual from manual.kenwood.com/edition/im366. Enter your destination and start the guidance. ● Finding points of interest NOTE 1) Touch [Where To?].
  • Page 14 Garmin and JVC KENWOOD will not be responsible for any traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs.

  • Page 15: Other Features

    NOTICE Traffic service is not available in some areas or countries. Garmin and JVC KENWOOD are not responsible for the accuracy or timeliness of the traffic information. With an FM traffic receiver, the navigation system can receive and use traffic information.

  • Page 16: How To Play Music

    Quick Start Guide ow to Play Music You can play audio files from music CD, disc media, USB storage device and iPod. NOTE For details on playable file format, media format, iPod model, etc., refer to the Instruction Manual. Connect the media you want to play as shown below. Disc 1) Press the <0>...

  • Page 17: Search The Track/File You Want To Listen To

    DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT Control the music you are listening to on the source control screen. The following symbols indicate the keys on the screen. The functions of the keys are the same despite the difference of the source you are listening to.

  • Page 18: How To Play Movie/Picture

    Quick Start Guide ow to Play Movie/Picture You can play DVD video, Video CD (VCD), movie files from disc media, iPod and picture files from USB storage device. NOTE For details on playable file format, device format, etc., refer to the Instruction Manual. Connect the media you want to play.

  • Page 19: How To Listen To The Radio/Hd Radio™ Tuner/ Siriusxm

    DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT ow to Listen to the Radio/ HD Radio™ Tuner/ SiriusXM Touch [Menu] on any screen. Top Menu screen appears. Touch [TUNER], [HD Radio], or [SIRIUS XM]. The unit switches to the radio/ HD Radio tuner / SIRIUS XM source.

  • Page 20: How To Make A Phone Call

    Quick Start Guide ow to Make a Phone Call You can use your Bluetooth cell-phone when paired to this unit. Register your cell-phone to the unit. Follow as the procedures shown below. For detailed operation, see Registering the Bluetooth Unit (P.75) in the Instruction Manual. 1) Touch [Menu] on any screen.

  • Page 21: Make Or Receive A Phone Call

    DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT Make or receive a phone call. See the table below for each operation method. Call by entering a phone number 1 Enter a phone number with number keys. 2 Touch [ Call using call records 1 Touch [ ] (incoming calls), [ ] (missed calls), or [ ] (outgoing calls).

  • Page 22: Installation Procedure

    Quick Start Guide If the fuse blows, first make sure the wires aren’t nstallation Procedure touching to cause a short circuit, then replace the old fuse with one with the same rating. Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, Before Installation do not remove the caps on the ends of the unconnected wires or the terminals.

  • Page 23: Installation Procedure

    DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT Unit Installation Procedure 1 To prevent a short circuit, remove Supplied accessories the key from the ignition and disconnect the terminal of the First of all, make sure that all battery. accessories are supplied with the 2 Make the proper input and unit.
  • Page 24 Quick Start Guide ● Toyota, Nissan or Mitsubishi car ● Toyota/Scion cars 7 (M5x6mm) or 8 (M5x7mm) 1) Cut out accessory 5 as illustrated. Car Bracket Cutting line 7 (M5x6mm) or 8 (M5x7mm) NOTE Make sure that the unit is installed securely in place.
  • Page 25 DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT GPS antenna Microphone unit 1) Check the installation position of GPS antenna is installed inside of the microphone (accessory =). the car. It should be installed as 2) Clean the installation surface. horizontally as possible to allow easy 3) Install the microphone.

  • Page 26: Removing Procedure

    Quick Start Guide Removing the unit Removing Procedure 1) Remove the trim plate by Removing the trim plate referring to step 1 in “Removing the trim plate”. 1) Engage the catch pins on the 2) Insert the two extraction key extraction key (accessory4) and (accessory4) deeply into the slots remove the two locks on the...

  • Page 27: Connection

    Green/Red optional rear view camera. To CMOS-310/CMOS-300 Blue/Red (Optional Accessory) (DNX890HD/ DNX7700BT only) To Relay Box Green/White camera control terminal FM/AM antenna input Accessory 0: GPS Antenna Accessory =: Bluetooth Microphone Rear Audio Preout...

  • Page 28: Connecting Wires To Terminals

    Quick Start Guide Connecting wires to terminals Fuse (10A) Fuse (10A) Ignition key switch Accessory 1 Red (Ignition wire) White/Black Yellow (Battery wire) To front left speaker White Car fuse box Car fuse box Black (Ground wire) (Main fuse) (To car chassis) Gray/Black To front right speaker...

  • Page 29: Optional Accessory Connection

    DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT Optional accessory connection SiriusXM Connect Vehicle iDatalink connector Tuner connector (DNX890HD/ DNX690HD/ (DNX890HD/ DNX690HD/ DNX570HD/ DNX5080EX only) DNX570HD/ DNX5080EX only) USB device ‡ USB terminal (commercially available) (0.8 m) † iPod terminal iPod terminal † (0.8 m) (0.8 m)

  • Page 30: About This Unit

    DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your by JVC KENWOOD Corporation is under license. device setup menu. Go to vod.divx.com for more Other trademarks and trade names are those of their respective owners.
  • Page 31 DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT Requirements Aha™: DNX890HD/ DNX690HD/ DNX570HD/ Requirements for listening to Aha™ are as follows: DNX5080EX: ■ FCC WARNING Download the Aha application from the iTunes App Store or Android Marketplace. This equipment may generate or use radio In the application on your device, log in and create a frequency energy.
  • Page 32 Quick Start Guide DNX890HD/ DNX690HD/ DNX570HD/ DNX5080EX: ■ IC (Industry Canada) Notice This device complies with Industry Canada licence- exempt RSS standard(s). Operation is subject to the following two conditions: (1)This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 33 Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
  • Page 34 Controlling Audio ontents Setting Audio ______________________ 100 Controlling General Audio ____________ 104 Before Use Radio, HD Radio™ Tuner Equalizer Control ___________________ 105 and SIRIUS XM Operation 2 WARNING _______________________ 4 Zone Control _______________________ 107 Radio/HD Radio Tuner Basic Operation __ 54 How to Read this Manual Sound Effect _______________________ 108 SIRIUS XM Basic Operation ____________ 57...

  • Page 35: Before Use

    Introduces some tips, notes, etc. does not operate normally after a while, • If you use a remote controller, you can jump • Do not watch or fix your eyes on the unit’s directly to the desired track/file with entering the consult your Kenwood dealer. display when you are driving for any track/folder/file number, play time, etc. For details, Reference mark “Direct search mode”...

  • Page 36: Basic Operations

    • Switches attenuation of the volume on/off. • North America Sales area: Pressing for 1 second stores the tag data of DNX890HD/DNX7700BT the current music from HD Radio broadcast or SIRIUS XM (P.64). • Central and South America sales area: Pressing for 1 second turns the screen off.
  • Page 37 Return to the Top page Return to the Top page Basic Operations Basic Operations DNX690HD/DNX570HD/DNX5700BT/DNX5080EX Number Name Motion Disc insert A slot to insert a disc media. slot 0 (Eject) • Ejects the disc. • Pressing for 1 second ejects the disc forcibly. fi...

  • Page 38: Turning On The Unit

    Return to the Top page Return to the Top page Basic Operations Basic Operations Initial setup urning on the Unit Perform this setup when you use this unit first time or when you reset the unit (P.119). The method of turning on is different depending on the model. Set each item as follows. Press the <MENU> button. Language Select the language used for the control screen and setting items. Default is “American English (en)”. 1 Touch [SET].

  • Page 39: How To Play Media

    (P.96). Press the <0> button. OEM SETUP (North America Sales area only) This function requires a commercial adaptor. USB device Consult your Kenwood dealer for details. Connect the USB device with the Touch [Finish]. USB cable. The panel opens. Insert the disc into the slot.

  • Page 40: Operating With The Top Menu Screen

    Return to the Top page Return to the Top page Basic Operations Basic Operations ● Customizing Top Menu screen perating with the Top Menu Screen Drag the icon you want to register to the upper line. Most functions can be performed from the Top Menu screen. You can move up to three icons. Touch [Menu] on any screen. NOTE • If [Menu] is not displayed during video/picture playback, press the...

  • Page 41: Common Operations

    Return to the Top page Return to the Top page Basic Operations Basic Operations Flick scrolling ommon Operations You can scroll the list screen by flicking the screen up/down or right/left. Introduces the common operations. General There are some functions which can be operated from most screens. [Menu] Returns to the Top Menu screen. Touching for at least 1 second displays the Screen Control screen. (Even when an image is dispalyed, touching for at least 1 second displays the Screen Control screen.) (RETURN)

  • Page 42: Navigation Operation

    Return to the Top page Return to the Top page Basic Operations Basic Operations Touch [ ] or [ ] in the navigation screen. avigation Operation For details on the navigation function, please refer to the Navigation Instruction Manual. Display the navigation screen Press the <NAV> button. Touching this area displays the audio screen. : D isplays the navigation and control : D isplays the navigation and current keys of the current source.

  • Page 43: Oem Features Operation

    Return to the Top page Return to the Top page Basic Operations Basic Operations EM Features Operation : D isplays information about the air : D isplays information about the conditioner of the vehicle. instruments such as a speedometer. By connecting this unit to the bus system of the vehicle using an iDataLink (commercially available), this unit can access the satellite radio source provided for the vehicle and vehicle information can be displayed on this unit. Touch [Menu] on any screen. Top Menu screen appears. Touch [OEM Features] in the Top Menu screen. OEM Features screen appears.

  • Page 44: Dvd/Video Cd (Vcd) Operation

    Return to the Top page Return to the Top page DVD, VCD DVD, VCD 5 Sub function menu VD/Video CD (VCD) Operation The following functions can be performed by using keys in this area. • Repeats the current content: Touch [ ].

  • Page 45: Dvd Disc Menu Operation

    Return to the Top page Return to the Top page DVD, VCD DVD, VCD Multi function menu Highlight control DVD Disc Menu Operation Highlight control lets you control the DVD You can set up some items in the DVD-VIDEO menu by touching the menu key directly on disc menu. the screen. Touch illustrated area during playback. The functions of each key are as follows. Touch [Highlight] in the Menu Control [4] [¢] screen.

  • Page 46: Zoom Control For Dvd And Vcd

    Return to the Top page Return to the Top page DVD, VCD DVD, VCD DVD play mode setting * T his function may not be performed Zoom Control For DVD And VCD depending on the disc. You can select DVD play mode. You can enlarge Playback screen for DVD and NOTE VCD. Touch [Next] in the Menu Control • You cannot touch the menu keys directly on the screen.

  • Page 47: Dvd Setup

    Return to the Top page Return to the Top page DVD, VCD DVD, VCD Language setup Parental level Menu/Subtitle/Audio Language* DVD Setup Language setup (P.29). This setting is for the language used in the Sets a parental level. You cannot setup this You can set up the DVD playback functions. Dynamic Range Control* menu, subtitle, and voice. You cannot setup item during DVD playback. Sets the dynamic range. these items during DVD playback. NOTE Touch [SET] of [Parental Level]. Wide: The dynamic range is wide.
  • Page 48 Return to the Top page Return to the Top page DVD, VCD DVD, VCD Disc setup Performs setup when using disc media. Touch [SET] of [DISC SETUP]. DISC SETUP screen appears. Select an option as follows. CD Read Sets the motion of this unit when a music CD is played.

  • Page 49: Cd/Audio And Visual Files/ Ipod Operation

    Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device 3 Multi function key D/Audio and Visual Files/iPod Operation Touch to switch the multi function menu. For details on the menu, see Multi function menu (P.36).
  • Page 50 Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device USB device and iPod Picture/video screen NOTE • The screen shot below is for USB device. It may be different from the one for iPod. Simple Control screen List Control screen 9 Searching file area (picture/video file only)
  • Page 51 Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device Multi function menu Sub function menu Music CD Disc media Music CD Disc media iPod USB device iPod USB device The following functions can be performed by using keys in this area.

  • Page 52: Search Operation

    Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device Other search Category search (USB device and iPod only) Link search (USB device and iPod only) Search Operation Touch the desired category from the Touch the desired item from the left When you want to narrow the list down, You can search music, video or picture files...
  • Page 53 Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device Touch [ 3 ] on the selected artwork. Folder search (USB device and disc Picture search (USB device only) Search from album artwork media only) The first song in the album is played.

  • Page 54: Movie Control

    Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device Favorite list Touch the desired artwork in the Movie Control favorite list. You can create an original playlist of your favorite 10 albums by selecting album You can adjust the movie playback from a artworks. disc media. Touch and drag the desired album In the playback screen, touch artwork in the lower line to the upper illustrated area.
  • Page 55 Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device Multi function menu Sub function menu PANDORA® Internet Radio Operation You can listen to the PANDORA® internet radio on this unit by controlling the application installed in the iPhone or Bluetooth device. The following functions can be performed by The following functions can be performed by To enter PANDORA mode, touch [Pandora] icon in the Top Menu screen. using keys in this area. using keys in this area. NOTE Status bar in center Searches the station.
  • Page 56 Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device Device select Station list screen Genre list screen You can display a Device select screen for You can perform the following functions You can perform the following functions device selection. from this screen. from this screen. Touch [ ] in the control screen. The Device select screen appears.

  • Page 57: Aha Operation

    Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device Multi function menu Sub function menu Aha Operation You can listen to the Aha on this unit by controlling the application installed in the iPhone or Android. The following functions can be performed by The following functions can be performed by To enter Aha mode, touch [aha] icon in the Top Menu screen. using keys in this area. using keys in this area. NOTE Searches the station. For details on searching, Sets the content backward 15 seconds.

  • Page 58: Usb/Ipod/Divx Setup

    USB/iPod/DivX Setup You can display a Device select screen for You can perform the following functions Sets the location information received from You can perform setup when using USB/ device selection. from this screen. Aha at the destination of navigation. iPod/ DivX (DNX890HD/ DNX7700BT/ DNX5700BT). Touch [ ] in the control screen. Touch [ ] in the control screen. The Device select screen appears. NOTE • Each operation in this section can be started from the Top Menu screen.
  • Page 59 Return to the Top page Return to the Top page CD, Disc, iPod, USB device CD, Disc, iPod, USB device USB setup iPod setup DivX(R) VOD (DNX890HD/ DNX7700BT/ DNX5700BT) Set each item as follows. Set each item as follows. This feature is available only for Central and South America sales area.

  • Page 60: Radio, Hd Radio™ Tuner And Sirius Xm Operation

    (P.65). (P.113). • Tunes in by entering direct number (HD Radio tuner only): • HD Radio broadcasting can be received only by the DNX890HD, DNX690HD, DNX570HD, and DNX5080EX. Touch [ ] and enter the desired number. For details, see Direct search (P.62).

  • Page 61: Sirius Xm Basic Operation

    Return to the Top page Return to the Top page Radio, HD Radio, SIRIUS XM Radio, HD Radio, SIRIUS XM SETUP] SIRIUS XM Basic Operation Touch to display the SETUP Menu screen. See Setting Up (P.86). Most functions can be controlled from the source control screen. AUDIO] Touch to display the Audio Control screen. See Controlling Audio (P.100).
  • Page 62 Return to the Top page Return to the Top page Radio, HD Radio, SIRIUS XM Radio, HD Radio, SIRIUS XM 5 Sub function key SETUP] Touch to display “Sub function menu” (7 in this table). Touch to display the SETUP Menu screen. See Setting Up (P.86).

  • Page 63: Memory Operation

    Return to the Top page Return to the Top page Radio, HD Radio, SIRIUS XM Radio, HD Radio, SIRIUS XM Manual memory Search by program type Memory Operation Selecting Operation (FM tuner and HD Radio tuner You can store the current receiving station or only) Auto memory Preset select channel in memory.

  • Page 64: Traffic Information

    Return to the Top page Return to the Top page Radio, HD Radio, SIRIUS XM Radio, HD Radio, SIRIUS XM Direct search (SIRIUS XM and Category/Channel search Traffic Information Receive Mode (HD Radio tuner HD Radio tuner only) (SIRIUS XM and HD Radio (HD Radio tuner only) only) tuner only)

  • Page 65: Itunes Tagging

    The multi function menu appears. XM receiver. be displayed according to the stored tag When you hear a song you enjoy on your Touch [ ] in the multi function menu. information. local HD Radio tuner or SIRIUS XM, you only List select screen appears. have to press the <ATT> button (DNX890HD) or Volume knob (DNX690HD/ DNX570HD/ Registering a bookmark Touch [Bookmark]. DNX5080EX) for 1 second. The song’s information will then be saved Touch [ List control screen appears. on this unit. The saved songs will then show Sub function menu appears.

  • Page 66: Content Alert

    Return to the Top page Return to the Top page Radio, HD Radio, SIRIUS XM Radio, HD Radio, SIRIUS XM Bookmark delete Touch [ Content alert Deletes all the selected bookmark(s) (SIRIUS XM only) Deleting a bookmark. When a broadcast program related to the Touch [ ] in the control screen. registered artist, song or team starts, a The multi function menu appears.

  • Page 67: Replay

    Return to the Top page Return to the Top page Radio, HD Radio, SIRIUS XM Radio, HD Radio, SIRIUS XM Parental code Program list Replay SIRIUS XM Setup Touching this plays back the displayed (SIRIUS XM only) You can set a SIRIUS XM parental code. program. NOTE Touch [Change] of [Parental Code] in You can replay last 60 minutes of current [Info Change]...
  • Page 68 Return to the Top page Return to the Top page Radio, HD Radio, SIRIUS XM Radio, HD Radio, SIRIUS XM Parental lock Mature setup Skip channel select NOTE • Each time you touched [Info Change], switches You can select the channels to enable SIRIUS You can automatically limit children’s contact You can set the undesired channels to skip. the sequence of the channel list as follows; XM Parental Lock function.
  • Page 69 Return to the Top page Return to the Top page Radio, HD Radio, SIRIUS XM Radio, HD Radio, SIRIUS XM Content alerts setup Content alerts Content Set City select for Content alerts Tune start You can turn on or off the Content alerts You can set a content for Content alerts. You can select a city for which traffic Touch [ON] or [OFF] of [Tune Start] in function.

  • Page 70: Bluetooth Control

    Smartphone Link (SPP) access the following URL: • Registering the Bluetooth Unit (P.75) Means that the device is Garmin Smartphone http://www.kenwood.com/cs/ce/bt/. • Connecting the Bluetooth unit (P.75) Link-ready. • The units supporting the Bluetooth function have been certified for conformity with the Bluetooth Pandora (SPP) PIN Code Set screen appears.

  • Page 71: Playing Bluetooth Audio Device

    Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Select a dialing method. Playing Bluetooth Audio Device Using Hands-Free Unit You can use telephone function by Bluetooth basic operation connecting the Bluetooth telephone to this unit. Simple Control screen List Control screen Making a call Press the <TEL>...
  • Page 72 Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation *1 Y ou can sort the list to begin with touched Receiving a call Operations during a call Phone number preset character. Adjust the receiver volume You can register frequently used phone Touch [ ] to answer a phone call or numbers to this unit.
  • Page 73 Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Reading SMS (Short Message Creating an SMS (Short Enter a message using keys and touch Using templates [SET]. You can create a message easily by selecting Service) Message Message Service) the desired sentence from the template list. Touch [SMS] in the Hands Free screen. Touch [ ] (received SMS message) or Touch [...

  • Page 74: Smartphone Link

    Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Voice Recognition Smartphone Link You can access the voice recognition function You can receive Garmin’s traffic information of the cell-phone connected to this unit. and weather forecast by connecting You can search the cell-phone phonebook your Android smartphone in which the by voice. (The functionality depends on the Smartphone Link application is installed to cell-phone.) this unit. Press the <TEL> button for 1second. Press the <NAV> button. Press for 1 second Press for 1 second Navigation screen appears.

  • Page 75: Hands-Free Setup

    Return to the Top page Return to the Top page Bluetooth Operation Bluetooth Operation Set each item as follows. Phone Information Use Hands-Free Setup Sets whether to use phonebook, outgoing, You can perform various setup about incoming and missed calls list. handsfree function. ON (Default): Yes. OFF: No.

  • Page 76: Setting Up

    Return to the Top page Return to the Top page Setting Up Setting Up View Camera Control System Setup etting Up Mode (Playback screen only) Monitor Screen Setup NOTE You can set up display when a CMOS-300 Select screen mode. • Each operation in this section can be started from Series view camera is used.
  • Page 77 Return to the Top page Return to the Top page Setting Up Setting Up User interface Language setup Touch panel adjustment TEL Key Longer than 1 Second Touch [SET] of [Language] in the User You can setup user interface parameters. You can set the operation performed when Interface screen.

  • Page 78: Display Setup

    Return to the Top page Return to the Top page Setting Up Setting Up EXT SW setup Setup memory Follow the instruction on the screen. Display Setup Set up the external switch power mode. Audio Control, AV-IN SETUP, Camera, and Touch [Menu] on any screen. Audio SETUP settings can be memorized. The Touch [EXT SW] in the System Menu memorized settings can be recalled at any Touch [SETUP].
  • Page 79 Return to the Top page Return to the Top page Setting Up Setting Up Monitor angle control Panel color coordinate Registering original color You can register your original color. You can set the screen and button Touch [Adjust] in the Panel Color illumination color. You can adjust the position of the monitor. Coordinate screen. The selectable items differ depending on the Touch [Angle] in the Display Menu Panel Color RGB Coordinate screen unit.

  • Page 80: Navigation Setup

    Return to the Top page Return to the Top page Setting Up Setting Up Changing background image Touch [Enter]. NAV Interrupt Speaker Navigation Setup Selects speakers used for voice guidance of the You can load an image from the connected You can set navigation parameters. navigation system. USB device and set it for the background Front L: Uses the front left side speaker for Touch [Menu] on any screen.

  • Page 81: Camera Setup

    Return to the Top page Return to the Top page Setting Up Setting Up Rear Camera* Camera Setup Software Information Selects the type of rear camera to use. You can set camera parameters. Check the software version of this unit. CMOS-3xx: When the CMOS-300 series with ID 1 set is connected. Touch [Menu] on any screen.

  • Page 82: Av Input Setup

    Return to the Top page Return to the Top page Setting Up Setting Up AV-IN1 Name/AV-IN2 Name* AV Input Setup AV Output Interface Setup External Device Control Sets a name to be displayed when you select You can set AV input parameters. a system that is connected via the AV INPUT You can select an AV source to be output at port.

  • Page 83: Controlling Audio

    Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Speaker setup ontrolling Audio Front You can select a speaker type and its size to OEM, 3-1/2 inch, 4 inch, 4-3/4 inch, 5 inch, get the best sound effects. Setting Audio NOTE 6-1/2 inch, 6-3/4 inch, 7 inch, 4x6, 5x7, 6x8, When the speaker type and size are set, 6x9, 7x10 • Each operation in this section can be started from...
  • Page 84 Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Crossover network setup Car type setup Speaker location setup DSP select You can set a crossover frequency of In the Car Type screen, touch [Location]. speakers. You can select whether using DSP (Digital Speaker Location screen appears. Signal Processor) System.

  • Page 85: Controlling General Audio

    Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Controlling equalizer manually Subwoofer Level Controlling General Audio Equalizer Control This setting cannot be performed when you Adjusts the subwoofer volume. This setting is select [iPod] in the Equalizer screen. not available when subwoofer is set to “None”. You can adjust equalizer by selecting the Touch [Audio Control].

  • Page 86: Zone Control

    Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Operation Controlling equalizer manually [3] (Front Source, Rear Source) Zone Control Select the audio source for each. Touch [Tone] in the Equalizer screen. You can select different sources for both Controlling EQ curves [∞], [5] (Rear VOL.) Set each item as follows.

  • Page 87: Sound Effect

    Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Space Enhancer Highway sound setting Elevation Sound Effect You can boost a certain range of sound that You can raise the sound position heard from You can set sound effects. Touch [Space Enhancer] in the Sound becomes hard to hear due to road noise. the speakers virtually. Effect screen. Touch [Sound Effect]. Touch [Highway Sound] in the Sound Touch [Elevation] in the Sound Effect Effect screen.

  • Page 88: Listening Position

    Return to the Top page Return to the Top page Audio Setting Up Audio Setting Up Realizer and Supreme Position DTA control Listening Position NOTE • Make fine adjustment of the delay time of the You can restore the sound lost due to audio You can fine-adjust your listening position. speaker output specified here to have a more compression to a realistic sound.

  • Page 89: Remote Control

    Return to the Top page Return to the Top page Remote Controller Operation Remote Controller Operation Functions of the Remote control Buttons emote control Switching the operation mode Direct search mode This unit can be operated using the remote control. For DNX890HD, DNX7700BT, DNX690HD, and DNX5700BT, the remote control is supplied with The functions operated from the remote Using the remote control, you can jump the unit. control differ depending on the position of directly to the desired file, track chapter, etc. For DNX570HD and DNX5080EX the remote control is the optional accessory (KCA-RCDV331). the mode switch. with entering the number corresponding to the content.
  • Page 90 Return to the Top page Return to the Top page Remote Controller Operation Remote Controller Operation Location of Function Name the mode switch VOICE Switches navigation display on/off. Displays the DVD menu. Turns the playback control on or off while playing VCD. Speaks the voice guidance.

  • Page 91: Troubleshooting

    The disc player is malfunctioning. Eject the disc and try inserting it again. Contact • Cannot adjust the volume of the the Kenwood dealer if this indicator continues rear speakers. blinking or the disc cannot be ejected. • Cannot set up the equalizer.

  • Page 92: Resetting The Unit

    Return to the Top page Return to the Top page Troubleshooting Troubleshooting Error Message Cause Solution Resetting the Unit USB Device The connected USB device is rated Check the USB device. Some trouble may have Error!! a current capacity higher than the occurred to the connected USB device.

  • Page 93: Appendix

    On this online manual, detailed information and *1 Incompatible with 8 cm (3 inch) discs. notes which are not written in this manual are *2 Function of DNX890HD, DNX7700BT, DNX5700BT provided. Make sure to read through the online ‡ : Playback is possible.

  • Page 94: Status Bar Indicator Items

    The random function is on. • When the iPod is connected to this unit, SVCD “KENWOOD” or “✓” is displayed on the iPod to indicate that you cannot operate the iPod. Identifies the Super Video CD. The repeat function is on.

  • Page 95: Region Codes In The World

    Return to the Top page Return to the Top page Appendix Appendix VER1 Region Codes in the World The VCD version is 1. Indicates the reception state of traffic information. VER2 The DVD players are given a region code according to the country or area it is marketed, as • White: TP is being received. shown in the following map. The VCD version is 2. • Orange: TP is not being received.

  • Page 96: Dvd Language Codes

    Return to the Top page Return to the Top page Appendix Appendix S/N Ratio (dB) DVD Language Codes Specifications DNX890HD, DNX7700BT : 100 dB (DVD-Video 96 kHz) ■ Monitor section Code Language Code Language Code Language DNX690HD, DNX570HD, DNX5080EX, DNX5700BT...
  • Page 97 : 45 dB (1 kHz) ■ DSP section (DNX890HD, DNX7700BT) Full Bandwidth Power (Front & Rear) (4 Ω, 14.4 V, ■ General 1 % THD) ■ Digital FM tuner section (DNX890HD, Graphics equalizer Operating Voltage : 22 W x 4 DNX690HD, DNX570HD, DNX5080EX) Band: 13 Band : 14.4 V (10.5 –...

  • Page 98: About This Unit

    • Search for “Pandora” in the Apple iTunes App Store find and install the most current version of the Aha™ by JVC KENWOOD Corporation is under license. • ABOUT DIVX VIDEO: DivX® is a digital video format to find and install the most current version of the application on your device.
  • Page 99 Return to the Top page Return to the Top page Appendix Appendix DNX890HD/ DNX690HD/ DNX570HD/ DNX890HD/ DNX690HD/ DNX570HD/ ■ CALIFORNIA, USA DNX5080EX: DNX5080EX: This product contains a CR Coin Cell Lithium Battery ■ FCC WARNING ■ IC (Industry Canada) Notice which contains Perchlorate Material –...
  • Page 101 GPS NAVIGATION SYSTEM DNX890HD DNX690HD DNX570HD DNX5080EX GPS NAVIGATION INSTRUCTION MANUAL © IM366_Nav_K_00...
  • Page 102 Contents Navigation End-User License Agreements Starting a Route Previewing Multiple Routes Following a Route Getting Started Using the Navigation Map Using the Navigation System Adding a Point to a Route Help When You Need It Taking a Detour Searching Help Topics Stopping the Route Status Bar Icons Updating Speed Limits...
  • Page 103 Using the Apps Traffic Information About Smartphone Link Traffic Subscription Activation Downloading Smartphone Link Understanding Traffic Connecting to Smartphone Link Traffic Data Using Smartphone Link Sending a Location from Your Phone About the Traffic Icon Disabling Calls While Connected Traffic on Your Route About Garmin Live Services Viewing Traffic on Your Route Subscribing to Garmin Live Services...

  • Page 104: End-User License Agreements

    End-User License Agreements Software License Agreement suppliers) and affiliated companies on the other hand. BY USING THE DNX890HD / DNX690HD / DNX570HD / DNX5080EX, YOU AGREE TO BE IMPORTANT: CAREFULLY READ THIS LICENSE BOUND BY THE TERMS AND CONDITIONS OF THE BEFORE USING THIS PRODUCT.
  • Page 105 HAVE BEEN ADVISED OF THE POSSIBILITY OF addition, you are prohibited from renting or leasing SUCH DAMAGES. GARMIN’S AND ITS LICENSORS’ the Data or the Garmin products containing the Data to any other person or third party. Only those TOTAL AGGREGATE LIABILITY WITH RESPECT TO ITS OBLIGATIONS UNDER THIS AGREEMENT rental car companies that are specifically authorized by Garmin in writing to rent Garmin products...
  • Page 106 End-User License Agreements Her Majesty and Canada Post, shall not be liable in as (i) if applicable, your subscription term is either respect of any claim, demand or action, irrespective terminated (by you or by Garmin) or expires, or of the nature of the cause of the claim, demand (ii) Garmin terminates this Agreement for any or action alleging any loss, injury or damages, reason, including, but not limited to, if Garmin...
  • Page 107 and all disputes, claims and actions arising from or in connection with the Data provided to you hereunder. Government End Users. If End User is an agency, department, or other entity of the United States Government, or funded in whole or in part by the U.S.
  • Page 108 End-User License Agreements accuracy, exhaustiveness, and completeness of NAVTEQ Traffic™ End User License the Traffic Data, which may contain inaccuracies Agreement and/or errors from time to time. To the maximum extent permitted by applicable law, any and all Your Garmin product may be equipped to receive warranties of any kind whatsoever with regard to traffic data.
  • Page 109 at 48 C.F.R. (“FAR”) 2.101, is licensed in accordance with this Agreement, and the Traffic Data delivered or otherwise furnished shall be marked and embedded as appropriate with the following “Notice of Use, ” and shall be treated in accordance with such Notice: Notice of Use Contractor (Manufacturer/ Supplier) Name: NAVTEQ...

  • Page 110: Getting Started

    Getting Started The first time you use your Kenwood Navigation System, you need to set up your system. The Help menu provides additional information. Help When You Need It WARNING See "Safety Precautions and Important Information" Select Apps > Help to view information in the Quick Start Guide for product warnings and about using the device.

  • Page 111: Satellite Signals

    Adding a Shortcut Satellite Signals You can add shortcuts to the Where To? menu. A After your vehicle is turned on, the navigation shortcut can point to a location, a category, or a system begins acquiring satellite signals. The search tool. The Where To? menu can contain up to system may need a clear view of the sky to acquire 36 shortcut icons.

  • Page 112: Finding Locations

    Finding Locations The navigation system offers many methods for finding locations. The detailed maps loaded in your navigation system contain locations, such as restaurants, hotels, and auto services. You can use categories to browse for nearby businesses and attractions. Finding a Location by Category Enter a search term.

  • Page 113: Finding Fuel Stations And Prices

    Finding Fuel Stations and Prices Finding a City Before you can use this feature, you must Before you can find a city, you must add a subscribe to the Fuel Price service, and your shortcut to the cities search tool (page 11).

  • Page 114: Finding A Location Using Coordinates

    Finding Locations Finding a Location Using Coordinates Select an option: Before you can find a location using coordinates, • Select a location marker. you must add a shortcut to the coordinates • Select a point, such as a street, intersection, or search tool (page 11). address location. You can find a location using latitude and If necessary, select the location description longitude coordinates.

  • Page 115: Going Home

    Going Home Select an area on the map. Select Where To? > Go Home. The address of the location appears at the bottom of the screen. Editing Your Home Location Information Select the location description. Select Where To? > Saved > Home. Select Set Location. Select > > Edit. Saving a Location Enter your changes.

  • Page 116: Starting A Route To A Saved Location

    Finding Locations Starting a Route to a Saved Location Assigning Categories to a Saved Location You can add custom categories to organize your Select Where To? > Saved. saved locations. ⁄ If necessary, select a category, or select All Saved Places. •...

  • Page 117: Navigation

    Navigation You can create, customize, and edit your routes. Starting a Route Using the Navigation Map Search for a location (page 12). From the main menu, select View Map. Select a location. If the zoom controls are hidden, select the map to display the zoom controls.

  • Page 118: Adding A Point To A Route

    Select Where To?. safe driving judgment at all times. Garmin and JVC KENWOOD will not be responsible for any Search for the location (page traffic fines or citations that you may receive for failing to follow all applicable traffic laws and signs Select Go!.

  • Page 119: Finding Exit Services

    Finding Exit Services Adding a Custom Avoidance Area Custom avoidances allow you to avoid specific From the map, select > Exit Services. areas and sections of road. You can enable and disable custom avoidances as needed. Use the arrows to select an upcoming exit. Select Settings >...

  • Page 120: Deleting Custom Avoidances

    Navigation Deleting Custom Avoidances Navigating Off Road If you are not following roadways as you navigate, Select Settings > Navigation > Custom you can use Off Road mode. Avoidances. Select Settings > Navigation. Select an option: Select Calculation Mode > Off Road > Save. • To delete all custom avoidances, select • To delete one custom avoidance, select the The route will be calculated as a straight...

  • Page 121: The Map Pages

    The Map Pages You can customize which data appear on the map and view upcoming turns and current location information. Customizing the Map Layers Changing the Map Perspective You can customize which data appear on the Select Settings > Map & Vehicle > Driving map, such as icons for points of interest and road Map View.

  • Page 122: Viewing A List Of Turns

    The Map Pages Viewing a List of Turns Viewing Junctions When you are navigating a route, you can view all While navigating a route, you can view the of the turns and maneuvers for your entire route junctions on major roadways. When you approach and the distance between turns.

  • Page 123: Resetting Trip Information

    Resetting Trip Information From the map, select > Trip Computer. Select > Reset All. Select an option: • When not navigating a route, select Select All to reset every data field, except the speedometer, on the page. • Select Reset Trip Data to reset the information on the trip computer. • Select Reset Max. Speed to reset the maximum speed. • Select Reset Trip B to reset the odometer. Viewing Current Location Information You can use the Where Am I? page to view information about your current location.

  • Page 124: Using The Apps

    Before you can connect to Smartphone Link, you must download and install the Smartphone Link application on your phone. Start Smartphone Link on your phone. See your other Kenwood system manuals and your phone owner's manual for connection information. appears in the status bar on your device when Smartphone Link is connected.
  • Page 125 About Garmin Live Services About ecoRoute The ecoRoute™ feature calculates your vehicle ⁄ fuel economy, carbon footprint, and the fuel price • Smartphone Link supports phones running Android of navigating to a destination, and offers tools for operating system version 2.1 or newer. improving fuel efficiency.
  • Page 126 Using the Apps Taking the ecoChallenge Viewing Your Fuel Economy The ecoChallenge helps you maximize your fuel Select Apps > ecoRoute™ > Fuel Economy. economy by scoring your driving habits. The higher your ecoChallenge scores, the more fuel The graph along the bottom shows your you save.
  • Page 127 Viewing the Weather Forecast Before you can use this feature, your device must Connect a USB mass storage device to your be connected to a supported phone running Kenwood unit. (page 24). This feature is not Smartphone Link available in all areas.
  • Page 128 Using the Apps Viewing Weather Alerts Editing a Trip Itinerary While you are traveling with your device, weather Select Apps > Trip Planner. alerts may appear on the map. You can also view a map of weather alerts near your current Select a saved trip.
  • Page 129 Viewing Previous Routes & Destinations Finding Parking Before you can use this feature, you must enable Before you can use this feature, you must the travel history feature (page 34). subscribe to the Dynamic Parking service, and your device must be connected to a supported You can view your previous routes and places you phone running Smartphone Link (page...
  • Page 130 Traffic information is not available on all models or in all areas. Traffic Data Using Smartphone Link NOTICE Garmin and JVC KENWOOD is not responsible for You can purchase a traffic subscription to receive the accuracy or timeliness of the traffic information.
  • Page 131 Traffic on Your Route Viewing Traffic on the Map When calculating your route, the navigation The traffic map shows color-coded traffic flow system examines the current traffic and and delays on nearby roads. automatically optimizes the route for the shortest From the map, select time.
  • Page 132 Before you can view a traffic camera, you must save a traffic camera. Select Apps > myCameras. Select a camera. Adding a Traffic Subscription You can purchase traffic subscriptions for other regions or countries. Go to www.garmin.com /kenwood for more information. GPS Navigation Instruction Manual...

  • Page 133: Customizing The Settings

    Customizing the Settings You can customize the settings of your GPS navigation system. Customizing the Navigation System Changing the Navigation Settings Select Settings. Select Settings > Navigation. • Calculation Mode—sets route preference. Select a setting category. • Avoidances—sets road features to avoid on a route. •...
  • Page 134 Customizing the Settings Updating the Time Settings Restoring Settings You can restore a category of settings or all Select Settings > Units & Time. settings to the factory default values. • Current Time—select Automatic to update the time Select Settings. automatically.
  • Page 135 Safety Cameras To update the navigation system software, you WARNING must have a USB mass storage device and an Garmin and JVC KENWOOD are not responsible for Internet connection. the accuracy of, or the consequences of using, a safety camera database.
  • Page 136 WARNING Garmin and JVC KENWOOD are not responsible for the consequences of using custom POI databases, or for the accuracy of custom POI databases. After downloading your POI database, use the Garmin POI Loader to install the POIs onto a USB mass storage device.
  • Page 137 English...
  • Page 138 For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com/Kenwood. © 2012 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd.
  • Page 141 SOUS GARANTIE (d) Deteitos au danos em decorr!ncia de consertos reatizados por pessoas nao autorizadas: JVC KENWOOD DO BRASIL COMERCIO DE ELETRONICOS LTDA saul dans les cas ou les produits Kenwood sontemploy!s dans Au cas...

This manual is also suitable for:

Dnx570hdDnx690hdDnx5080exDnx5700bt

Table of Contents