Multiplexer Setup; Sequence Setup; Sequence Setup (Multiscreen Monitor) - Panasonic WJ-HD500A Operating Instructions Manual

MULTIPLEXER SETUP

These items let you determine functions such as sequence
and power on status for this Disk Recorder.
1. Select MULTIPLEXER SETUP in the WJ-HD500 SETUP
menu by pressing the D or C button, then press the
SET button.
The MULTIPLEXER SETUP menu as shown below
appears on the monitor screen.
5 MULTIPLEXER SETUP

SEQUENCE SETUP

POWER ON MULTI OUTPUT
SPOT OUTPUT
SECRET VIEW
2. Select an item or item parameter in the menu by press-
ing the D or C button.
3. To return to the WJ-HD500 SETUP menu, press the
SETUP/ESC button.
Sequence Setup
These items let you program the sequence pattern for the
Spot and Multiscreen Monitor.
1. Move the cursor to SEQUENCE SETUP in the MULTI-
PLEXER SETUP menu by pressing the D or C button,
then press the SET button.
The SEQUENCE SETUP menu as shown below appears
on the monitor screen.
5-1 SEQUENCE SETUP
MULTI LIVE SEQUENCE SETUP
QUAD SHIFT
QUAD PATTERN SETUP
SEQ TIMING
GROUP SEQ MODE
SEQ DWELL
AUTO SKIP
SPOT LIVE SEQUENCE SETUP
SEQ TIMING
AUTO SKIP
2. Select an item or item parameter in the SEQUENCE
SETUP menu by pressing the D or C button.
3. To return to the previous MULTIPLEXER SETUP menu,
press the SETUP/ESC button.
QUAD-4A
1
OFF
OFF
INT
QUAD
2S
ON
INT
ON
Sequence Setup (Multiscreen
Monitor)
There are three sequence patterns to run on the
Multiscreen Monitor.
The items shown below let you program the sequence to
run on the Multiscreen Monitor.
Live Sequence
Live sequence is a series of 16 steps assigned to the
Multiscreen Monitor.
The sequence steps can be combined with four screen
segments (quad) display.
Live Sequence Pattern Setting
1. Move the cursor to MULTI LIVE SEQUENCE SETUP in
the SEQUENCE SETUP menu by pressing the D or C
button, then press the SET button.
The menu shown below appears on the monitor screen.
5-1-1 MULTI LIVE SEQUENCE SETUP
PRE-
STEP CAM SET SEC
1 4A -- 2S
2 4B -- 2S
3 4C -- 2S
4 4D -- 2S
5 -- -- 0S
6 -- -- 0S
7 -- -- 0S
8 -- -- 0S
2. Move the cursor to the step editing area by pressing
the A, B, D or C button.
3. Select a camera to be displayed for CAM editing area
by pressing the + or - button.
1 - 16: Displays the image of the selected camera num-
ber.
4A - 4D: Displays the assigned images in quad.
Refer to the QUAD PATTERN SETUP for settings.
--: Disables display and will skip automatically.
4. Move the cursor to the PRESET editing area by press-
ing the B button, then select a preset position to be
displayed by pressing the + or - button, if applica-
ble.
1 - 64: Selects a preset position of the assigned cam-
era.
--: No preset position
The factory default setting is --.
PRE-
STEP CAM SET SEC
9 -- -- 0S
10 -- -- 0S
11 -- -- 0S
12 -- -- 0S
13 -- -- 0S
14 -- -- 0S
15 -- -- 0S
16 -- -- 0S
57