Setting Up The Dvr; Setup - Main Screen - Panasonic SP-DR04 Instruction Manual

2. Setting up the DVR

The following sections detail the initial setup of a DVR.
3-1. Setup – Main Screen
When booting a system at first, the following messages display. After initializing, select a language and set
the time.
To enter the setup menu, select a right button of the mouse or press the SETUP button on the remote
control.
A default Password is 1111.
Table 3.1.1. Setup menu tree
Then password input screen will be displayed. User can select a password by pressing a small square box
next to a password input box. The factory default password is 1111. It is highly recommended to assign a
new password to protect the system. User can assign a new password in SECURITY setup menu.
CONTROL BAR AUTO HIDE: Set to hide automatically or display continuously a control bar on the bottom
side in a Live mode.
CHANNEL INFORMATION: Display a channel number, channel name, resolution, frame rate, quality and
recording type of each channel.
SYSTEM INFORMATION: Display a software version, storage size, network type, IP address, MAC
address, DDNS status, DVR ID and remote controller ID of the system.
SYSTEM LOCK: To lock the system, user input a password. To unlock the system, please press ESC
button for 5 seconds on a front panel or a remote control. You can also unlock the system when pressing
LOCK icon on the screen using a mouse control. Then, the system will ask a password.
19