ActionTec GT701R User Manual page 72

Unnumbered Mode/VIP Mode
If a block of public static
Unnumbered Mode by clicking in the appropriate check box. Then, enter the IP
Address and Subnet Mask in the "Gateway Address" and "Unnumbered Subnet
Mask" text boxes below the "Unnumbered
and Restart to make all changes permanent.
The Unnumbered Mode feature automatically configures the appropriate
ing for the Address block. The
IP
-to-
to be routed WAN
☞
Note: The
when purchasing a block of public static
ISP
the if this information was not received.
ISP
VIP Mode This feature is used in conjunction with Unnumbered Mode. When
Mode is activated, the Modem uses
VIP
Area Network (
LAN
be configured to the
addressing. All computers using public
IP
have the public addresses statically assigned.
IP
After configuring your settings, click Next, then click Save and Restart to make all
changes permanent.
Chapter 6 Advanced Setup
addresses was purchased from the
IP
route will bypass
IP
, as well as
LAN LAN
Address information should be obtained from the
IP
), allowing both public
simultaneously, while the
LAN
Address." Click Next, then click Save
IP
NAT
-to- .
WAN
IP
for private
NAT IP
addressing and private
IP
DHCP
addresses with Unnumbered Mode must
IP
67
, select
ISP
IP
, enabling the public
address. Contact
addressing for the Local
addressing to
IP
server is reserved for private
rout-
s
IP