ActionTec GT701R User Manual page 107

There should be an entry for
Additionally, the "IP Address" entry should be on the
"x" defining a range from
If the Ethernet adapter is showing an incorrect IP address, click Release, which
sets all values back to 0 (zero). Then, click Renew (this process may take a few
seconds). The renewed IP address should be on the
If an error occurs, or the IP address renews with an address outside the
network, contact the ISP immediately
192.168.0.X
If running Windows
s
Start, Run, enter
in the "Open" text box, then press OK. A "
ing cursor (prompt). Enter
at the prompt, then press Enter on the keyboard.
The IP address of the Ethernet adapter should appear in the
Ensure the address in the
IP
from though
2 255
If the Ethernet adapter is showing an incorrect
at the prompt, then press Enter on the keyboard, which sets all values back
to 0 (zero). Next, enter
at the prompt, then press Enter on the keyboard (this process may take a few
seconds). The renewed
If an error occurs, or the
network, contact the
192.168.0.X
Ensure the browser is not set to "Never dial a connection" and there are no
s
previous settings.
LAN
To check this, go to Start, Settings, Control Panel. In the Control Panel,
double-click Internet Options. When the "Internet Properties" window
appears, ensure that the "Never dial a connection" option is not activated,
Settings. When the "Local Area Network (
then click
LAN
window appears, ensure that no settings are activated. If there are settings
activated, deactivate them.
Shutdown and restart the computer. After the computer restarts, unplug the
s
power cord from the Modem and plug it back in. When the lights glow solid
green, try accessing the Internet.
Actiontec DSL Modem User Manual
address, Subnet Mask, and Default Gateway.
IP
though
2
or Me, check the computer's
98 SE
CMD
ipconfig
192.168.0.X
).
ipconfig /release
ipconfig /renew
address should be on the
IP
address renews with an address outside the
IP
ISP
102
192.168.0.X
).
255
192.168.0.X
" window appears, with a blink-
DOS
network (with "x" defining a range
address, enter
IP
192.168.0.X
immediately
network (with
network.
settings. Select
TCP/IP
window.
DOS
network.
) Settings"
LAN