ActionTec GT701R User Manual page 69

Obtain an IP Address through PPPoE or PPPoA
Select one of these options to allow the Modem to use the Point-to-Point over
Ethernet ( ) or Point-to-Point over
PPPoE
"Broadband Connection via PPPoE" screen:
"Broadband Connection via PPPoA" screen:
If a User Name and Password was entered in the Installation Buddy or during
Basic Setup, it should be displayed in the "Broadband Connection via
" screen. If not, enter the information now. If the information is unavailable,
PPPoA
contact the .
ISP
PPP Auto Connect
auto connect is activated (by clicking in the appropriate check box), the
If
PPP
Modem will attempt to automatically redial the
disconnected during an online session.
Actiontec DSL Modem User Manual
ATM
PPP
64
( ) protocol.
PPPoA
connection if it is dropped or
PPP
Auto Connect is turned ON by default.
PPPoE/