ActionTec GT701R User Manual page 127

8. In the General tab, make sure the circle next to "Use the following
is selected. When active, a black dot appears in the circle. If the circle already
contains a black dot, leave it alone.
9. Enter the following address in the "
Enter the periods in the address by pressing the space bar on the keyboard.
10. Enter the following address in the "Subnet mask" text box:
Enter the periods in the address by pressing the space bar on the keyboard.
11. Click
. The Internet Protocol (
OK
12 In the Local Area Connection Properties window, click
Connection Properties window disappears.
13. Click Close in the Local Area Connection Status window. The window
disappears.
14. Close the Network and Dial-up Connections window by clicking on the "x"
button at the upper right corner of the window.
The computer is now set up with a static
Gateway's Web Configuration Utilities (Advanced Setup, Utilities, etc.).
Actiontec DSL Modem User Manual
IP
192.168.0.2
255.255.255.0
TCP/IP
122
Address" text box:
) Properties window disappears.
address, allowing the user to access the
IP
Address"
IP
The Local Area
Close.