ActionTec GT701R User Manual page 70

Encapsulation (PPPoA only)
Select one of the encapsulation options, based on information received from the
Obtain an IP Through DHCP
Select this option if the
(used for configurations without a Static
Modem will query the Internet Service Provider (
routing information, which will terminate at the Modem, as opposed to the
address and routing information being bridged to terminate at the computer. This
allows the use of the router capabilities for the Local Area Network (
s need to authenticate their end users with a Host Name and/or Domain
Some
ISP
Name. If this is the case, check with the
enter them in the "Broadband Connection via
require these settings, leave the text boxes blank.
☞
Note: Contact the
Chapter 6 Advanced Setup
service is configured to use
IP
IP
ISP
if unsure of the proper configuration.
ISP
65
RFC 1483
assigned by an ). In this mode, the
ISP
) to receive the
ISP
for a host name and domain name and
" screen. If the
DHCP
ISP
Bridged or Routed
address and
IP
IP
).
LAN
does not
ISP
.