Other Metering Operations; Exposure Index Correction - Sekonic MULTIMASTER L-408 Operating Instructions Manual

9.1 Exposure index correction

Although your L-408 has been calibrated to exacting
standards, you can manually correct the exposure
within B.9 EV.
F/EV/MULTI button (~=a) to change display.
Use the UP/DOWN button (e@) for exposure
index correction.
mark continues until the exposure index
correction is canceled.
The UP button increases the exposure index 0.1
step at a time (the exposure is reduced), while
the DOWN button decreases the value (the
exposure is increased). Holding down the button
continuously increases or decreases the
exposure index.
exposure value reaches zero (0). The
NOTES
in actual photographic conditions.
the above correction regardless of the metering mode selected such as
incident or reflected light measurement, and ambient or flash
measurement.
20
q
mark goes out.
- - - -