Ambient Light Measurement; Mode Selection; Measuring Switch; Shutter Speed Priority Setup - Sekonic MULTIMASTER L-408 Operating Instructions Manual

6.1 Mode selection

Press the mode selection button (c==@) to select the

6.2 Measuring switch

Press the F/EV/MULTI button (e=@) to select the
desired measuring value display.
After this measurement, you can change the measuring mode by pressing the F/EV/
MULTI button.
NOTE
of shutter speed and aperture.

6.3 Shutter speed priority setup

Press the UP or DOWN button to set the desired shutter speed.
N O T E
1/8000 sec. , the shutter speed of 1/200 and 1/400 sec. appears in the
display, then from 8 to 128 frames per second (f/s) for cine speeds can
be set.
6.4

Measurement

Press the measuring switch (*a) to start measurement.
Shutter speed priority
measurement is set at "T:1/
125" and "F:2.8+3/10".
Exposure Value
measurement is set at
"EV10.3".

6. Ambient Light Measurement

4 56 8 11 1622324154 90
Shutter priority measurement
EV exposure value measurement
Exposure priority measurement
11