Oce cm3521 User Manual page 70

Setting up network printing
4
Click "Others", select "Peer to Peer Printing Port" from the list, and
then click the [OK] button.
The Peer to Peer setup dialog box appears. The printer connected to
the network is automatically detected.
5
Select the printer from the device list, enter the port number, and then
click the "Add Port" button.
– The port is added. Skip to step 8.
– If the desired printer does not appear in the device list, proceed to
step 6.
6
Click the [Manual setup] button.
7
Enter the TCP/IP or IPX setting for the network being connected, and
then click the "Add Port" button.
– The port is added. Skip to step 8.
8
Click the [OK] button when the confirmation message appears.
The port is added.
9
Click the [OK] button to complete the operation.
cm3521
3
3-15