Ieee 1284/Usb; Capture Print Data - Oce cm3521 User Manual

10

IEEE 1284/USB

You can specify whether to use the parallel port or the USB port. (Default set-
ting: USB)
1
On the Administrator Setting screen, touch [7 Printer Setting].
2
On the Printer Setting screen, touch [3 IEEE 1284/USB].
3
Touch the desired port.
Note
The IEEE 1284 and USB ports cannot be used simultaneously.
After changing the setting for USB or IEEE 1284, the power must be
turned off, then on again.

Capture Print Data

You can specify whether to allow or prohibit data capturing of a print job.
(Default setting: Allow)
1
On the Administrator Setting screen, touch [Security Setting].
– For details on displaying the Administrator Setting screen, refer to
"To display the Administrator Setting screen" on page 10-23.
2
On the Security Setting screen, touch [4 Security Details].
3
On the Security Details screen, touch [
[Print Data Capture].
10-30
Various settings
] or [ ], and then touch
cm3521