X54X Service Menus - Lexmark C54x Product Study Manual

Lexmark C54x/X54x Color Product Study Guide

X54x Service Menus

Several hidden menus exist to configure advanced settings, troubleshoot problems or obtain additional
printer information. The settings contained in these menus should not be changed unless it is
specifically requested by the Service Manual or technical support. Changing the settings may cause
improper operation of the printer.
For a complete list of these menus, consult the Service Manual.
Menu
Configuration Menu
Diagnostics Mode
Network SE Menu
FAX SE Menu
SE Menu
Additional error
message
information
Enter Invalid Engine
Code Mode (POR
Sequence)
For Training Purposes Only
How to Access
To enter Configuration Menu, do the following:
1. Turn off printer.
2. Press and hold Right
3. Turn on the printer.
4. Release the buttons when Performing Self
Test displays.
To enter the Diagnostic Menu, do the following:
1. Turn off printer.
2. Press and hold Left
3. Turn on the printer.
4. Release the buttons when Performing Self
Test displays.
To enter the Network SE Menu, do the following:
1. Enter Customer Network/Ports menu.
2. Press and hold Left
3. Release the buttons when the menu
appears.
1. Enter **411 while in the Home Prime screen.
From a web browser on a host PC, add /se to the
printer IP address.
While error displays on panel, press Back
Right .
Press Back and Left
The Configuration Menu contains a set of
and Select . menus, settings and operations which are
infrequently required by a user.
Generally, the options made available in
this menu group are used to configure a
printer for operation.
The Diagnostics Menu contains the
and Select .
settings and operations used while
manufacturing and servicing the printer.
Configure or reset advanced Network
settings.
and Right .
You do not POR the machine to access
this menu.
Configure or reset advanced Fax settings.
You do not POR the machine to access
this menu.
Configure or reset advanced settings.
You do not POR the machine to access
this menu.
Access secondary debug information.
and
You do not POR the machine to access
this menu.
Load updated engine code.
.
42
Rev 2.6
Function
9/15/2009