Device Setting - Fujitsu fi-5900C Operator's Manual

■ Settings
Using the Software Operation Panel, you can configure the following settings for the scanner connected to
the PC.
［Device setting］
Item
Page counter For evaluating the consumable
(Consumables replacement cycle or cleaning cycle.
counter) Use this function to reset the counters
after replacing consumables or the
cleaning.
Refer to
Replacement Cycle" on page
Power saving Select the waiting time before entering
the Power saving mode.
Refer to
on page
Offset setting Adjust the start position for the docu-
ment scanning.
Refer to
page
Vertical magnifi-
Adjust the magnification in the feed-
cation Adjustment
ing direction.
Refer to
page
Explanation
"5.1 Consumables and
124.
"8.2 Power saving setting"
185.
"8.3 Offset/Scan scale" on
186.
"8.3 Offset/Scan scale" on
186.
Selectable parameter
After Cleaning/Pad/Pick roller/Sepa-
rator Roller/Brake rollerremaining ink
level (only for the imprinter option)
Setting range 15 to 55 minutes (set in
steps of 5 min.)
Left right: setting range -2 to 3mm
(set in 0.5mm steps)
Up down: setting range -2 to 3mm (set
in steps of 0.5mm)
Setting range -6.3% to 6.3% (set in
0.1% steps)
8.1 Scanner Settings
8
Default
-
15 min.
left right
0mm
up down
0mm
0%
179