Consumables And Replacement Cycle - Fujitsu fi-5900C Operator's Manual

5.1 Consumables and Replacement
Cycle
The following table lists the Part No. and the standard replacement cycle of the consumables. It is recom-
mended that you stock extra consumables before the ones in the scanner reach the end of Their service life.
The consumables must be replaced periodically. You can check the number of scanned pages for the Pad,
the Pick roller, the Brake roller and the Separation roller. For further details, refer to
reset the Consumable/Cleaning Counter" on page
Part Name
Pad
Pick Rollers
Brake Roller
Separator Rollers
Print Cartridge
The replacement cycle is based on the printing on Letter/A4 woodfree paper or wood containing paper
2
documents (64 g/m ). The replacement cycle may differ due to paper quality, print density or paper type.
The print cartridge is a consumable for the imprinter option (sold separately). It can be used for the Pre-
and Post-imprinter.
For the purchase of the consumables, contact the FUJITSU scanner dealer where you purchased your scan-
ner.
ATTENTION
124

5.1 Consumables and Replacement Cycle

125.
Part No.
PA03450-K014
PA03450-K011
PA03450-K013
PA03450-K012
CA00050-0262
Use only the consumables specified by PFU Limited. Do not use any con-
sumables from other manufacturers.
"5.2 How to check and
Standard replacement cycle
600,000 sheets or 1 year
600,000 sheets or 1 year
600,000 sheets or 1 year
600,000 sheets or 1 year
4,000,000 characters