Fujitsu fi-5900C Operator's Manual page 70

7. Configure settings for scanning and click the [OK] button.
For details on this dialog box, refer to
Driver" on page
8. On the [Profile Editor] window, click the [OK] button to return to [New
batch...] dialog.
9. Load the documents on the hopper.
10. Click the [Scan] button to start scanning.
⇒ Scanned images are displayed on the window.
Refer to the "QuickScan
functions and operations of QuickScan. After the installation of QuickScan, it is registered in
the [Start] menu.
50
2.13 How to use the Scanner Driver
"Configuration Window of FUJITSU ISIS Scanner
51.
Overview" or the "QuickScan Help" for further information on