Device Settings - Fujitsu fi-5900C Operator's Manual

［Device settings 2］
Selecting each item displays detailed settings (parameters) in the right part of the dialog box.
Item
Multifeed
Select the method to detect Multifeed.
"Section 8.4" (Check either of overlapping or document
length, or both of document length and over-
lapping)
Multifeed detec- Multifeed can be detected by this setting,
tion when scan- even if the manual feeding is set.
ning in manual
feeding mode
"Section 8.5"
180
8.1 Scanner Settings
Explanation Selectable parameter
None/Check Overlapping
[Ultrasonic]/Check Length/
Check Overlapping and
Length.
Selectable length (to be
detected as length difference):
10, 15 or 20mm
Disable/Follow driver settings Disable
Default
Check
overlapping