Color/Monochrome Auto Detection - Fujitsu fi-5900C Operator's Manual

3.11 Color/monochrome Auto Detection

The scanner detects whether the scanned document is color or binary monochrome. According to this detection, the
images will be output in color (or grey scale) for colored documents, ide binary black and white for monochrome
documents.
*Depending on the application, this function may not operate properly.
The settings for MultiStream can be done on the Scanner Driver.
The following operation uses the TWAIN driver.
1. Start up TWAIN driver from the application you are using
Refer to
"2.13 How to use the Scanner Driver" on page
2. Please check the [Enable Multi Image] checkbox in the [TWAIN Driver] window.
* When [Long Page..] is specified at [Scan Type:], you can not check this checkbox.
96

3.11 Color/monochrome Auto Detection

41.
Main screen