Starting And Stopping; Assembly Instructions - Flymo Sabre Cut User Manual

A1
Attatching the Hedgetrimmer to the Sabre Handle
1. Push the Hedgetrimmer head onto the Sabre Handle until you hear a click. (A1)
2. Push the Hedgetrimmer head further onto the Sabre Handle until it reaches the mark shown in Fig A2.
3. Turn the Hedgetrimmer head collar clockwise until it is secure. (A3)
B1
C
D
E
1
2
3

Assembly Instructions

A2
Sabre Handle Length Adjustment
B2

Starting and Stopping

F
A3
To adjust the handle length
1. Loosen the Sabre Handle collar. (B1)
2. Adjust length of the handle to the most com-
fortable operating position (B2).
3. Re-tighten the Sabre Handle collar.
Before starting your Hedgetrimmer.
1. Remove blade cover as illustrated in Fig. C.
To start your Hedgetrimmer
1. Attach your product to the fully charged Power
Pack.(D)
• The assembled product is provided with a lock-
off button (E1) to prevent accidental starting.
There are two switch levers fitted to your
•
Hedgetrimmer. Both switch levers need to
be held in the operating position (See Fig E)
for the product to start.
1. To start, press lock-off button (E1), squeeze
the upper switch lever (E2), release lock-off
button and squeeze the lower switch lever (E3)
To stop your Hedgetrimmer
• Move Hedgetrimmer away from cutting area
before stopping.
1. To stop, release one of the switch levers.(F)