Starting And Stopping; Assembly Instructions - Flymo Minitrim ST Original Instructions Manual

A
1
B
2
D

Assembly Instructions

2
1
2
C
1

Starting and Stopping

Shaft Assembly (A)
1. Locate the lower shaft (A1) into the upper shaft (A2).
2. Grasp firmly and hold steady the lower shaft. Locate
the upper shaft and snap together firmly.
• The unit is correctly assembled when the gap be-
tween the upper and lower shaft has been
closed.
Safety Guard Assembly (B) & (C)
1. Locate the safety guard (B1) over the cutting head
(B2). Ensure the nylon line is fed through the hole in
the safety guard as illustrated in fig B.
2. Push into location and turn safety guard in the direc-
tion illustrated in Fig C, until a click is heard and the
safety guard is securely locked in position.
• ENSURE THE SAFETY GUARD IS SECURELY IN
PLACE BY ATTEMPTING TO TWIST GUARD.
WARNING
Cutting head continues to rotate after the trimmer
has been switched off.
To start your trimmer
1. Squeeze the safety lock-off lever/switch lever (D).
To stop your trimmer
1. Release the switch lever.